Questions and Answers for Delta Ashlyn Single Hole Single-Handle Bathroom Faucet with Metal Drain Assembly in Chrome

A:  Hi waldoe, Thank you for your question. This unit comes with a metal pop-up assembly. Best regards, Jon

A:  Hello Emilf, Thank you for your question. You can place a special order for the Delta Ashlyn with your local supplier. Best regards, Brandis

A:  Hello Delta Customer, Thank you for your question. The Stainless Steel finish on the 564-SSMPU-DST Delta faucet is not considered a spot free/shield finish. Here is some basic cleaning and care information: Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains and calcium build up may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward. Also take care to protect surfaces that may be damaged by vinegar. The white vinegar can stain porous stones like granite, limestone and marble. You can also use a cleaner called " bar keepers friend" which works very well with removing water spots. If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: 409, Fantastic, or Windex, when used according to the manufacturers' instructions for use. Avoid using the following which can damage your finish: Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub and Tile Cleaner, Lime Away and Soft Scrub. For additional questions please contact 1-800-345-3358 or customerservice@deltafaucet.com. Best regards, Brandis

A:  Aerator is inside and can be easily removed to flush it with the enclosed tool.

A:  Yes, the faucet kit even has a separate plastic tool to remove the aerator to clean it

A:  Hello Mom1991, Thank you for your question. The 564-MPU-DST includes a 1.2 gpm (gallons per minute) aerator. If you have addtional questions please contact our customer service department at 1-800-345-3358 or via email at customerservice@deltafaucet.com. Best regards, Brandis

A:  Yes it does have an aerator.

A:  Delta faucets are made in America.

A:  Hello Faucet101, Thank you for your question. We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA (and Panyu, China). As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made. Best Regards, Brandis

A:  Hi Jack, Thank you for your question! The recommended hole size can be found on the technical specification sheetfor the product. Please view the specification sheet shown on the website. If you need additional assistance please contact our customer service department at 1-800-345-3358 or via email at customerservice@deltafaucet.com. Best regards, Brandis .

A:  Hi Jack, Thank you for your question! The recommended hole size can be found on the technical specification sheetfor the product. Please view the specification sheet shown on the website. Best regards, Brandis .

A:  Hi Tushar, Thank you for your question! The 564-SSMPU-DST single handle lavatory faucet has a maximum deck thickness of 2 7/8". -Brandis

A:  Yes, you can mount this fixture in a tube with a one-hole setting.

A:  Hi Genfever, Thank you for your question. Delta Faucet model # 564-SSMPU-DST is made of brass. Thanks. Jody

A:  Hi Kevin, Thank you for your question. The RP77263RB 4" escutcheon that ships with the 564-RBMPU-DST faucet has a round 1.335" hole but also has 2 notches and 2 posts that lock the faucet into place. This part can be viewed on the parts diagram for the full faucet model. Thanks, Dave

A:  This faucet has a round 1.335" hole but also has 2 notches and 2 posts that lock the faucet into place.