Q:Could I use this tool to remove plaster from brick?
by|Apr 12, 2024
1 Answer
Answer This Question
A: yes it can
by|Apr 15, 2024
Q:How heavy of a hammer/maul would you suggest using with this concrete chisel?
by|Oct 5, 2021
2 Answers
Answer This Question
A: Doesn't matter. It will break your tile no matter how heavy the hammer.
by|Apr 20, 2024
1 found this answer helpful
A: You should be able to use about any size you want. 40 oz. 48 oz. or even smaller depending on the job you are doing.
by|Apr 20, 2024
2 found this answer helpful
Q:can you strike this with a regular hammer or is there a special hammer?
by|Apr 26, 2020
4 Answers
Answer This Question
A: I used with a regular hammer and a rubber mallet. Both worked well
by|Apr 20, 2024
1 found this answer helpful
A: Regular hammer is fine.
by|Apr 20, 2024
1 found this answer helpful
A: I used a rubber mallet
by|Apr 20, 2024
1 found this answer helpful
A: You can strike it with any hammer you want, but it is most effective with a heavy hammer or a mallet.
by|Apr 20, 2024
2 found this answer helpful
Q:I need to remove a few pavers about 5" square set on concrete. In order to penetrate the depth of about 3-1/2", I would probably need to shave off 1 side of paver to penetrate and demolish concrete underneath. Would this tool work as required, do you think? Hopefully it's sturdy enough.
by|Sep 22, 2018
2 Answers
Answer This Question
A: This is a great tool for shaving off concrete, but what you really will need is a small demolition hammer with a chisel point. This tool, although would work, will take a very long time to do it since the pavers are set in concrete. This tool will be great for doing the fine work of cleaning up the pavers and the area which they come out of.
by|Nov 6, 2021
4 found this answer helpful
A: It does not cause a clean break, it breaks it but it will have jagged edges
by|Nov 6, 2021
3 found this answer helpful
Q:What does "lifetime guarantee" mean and how do I receive a replacement?
by|Jul 12, 2018
1 Answer
Answer This Question
A: https://www.vaughanmfg.com/contact-us.aspx send it here