Q:Can I feed this from a 1/2 inch DIG poly tube? or does it need to connect to a sprinkler riser?
by|Jul 16, 2022
2 Answers
Answer This Question
A: Don't waste your money. Insufficient watering from this set up. I through my purchase in the trash as I had cut lines etc.
by|Jul 17, 2022
A: The Maverick 12 outlet drip manifold is designed to install directly to a ½” sprinkler riser. You can install on ½” poly tubing but you would need a couple of fitting so you can use a ½” sprinkler riser on your poly tubing. You would need a C38 swivel compression tee and our Q59 conversion elbow this will allow you to use a ½” sprinkler riser and install the Maverick 12 outlet drip manifold. If you have any further questions on this installation, please feel free to contact our technical service/product support team at 1-800-322-9146.
by|Jul 18, 2022
Q:I would like to purchase something like the DIG Maverick 4 GPH 12 outlet Drip Manifold Kit, but my riser has a 3/4 inch diameter and the kit connects to. 1/2 inch riser. Is there a similar kit that connects to a 3/4 inch riser?
by|Jul 26, 2020
1 Answer
Answer This Question
A: Unfortunately all of our manifolds we make are designed to fit ½ in. risers. You would need a series of fittings to adapt our 12 outlet drip manifold to a ¾ in. riser. You would need a ¾ in. PVC sch. 40 FPT x FPT coupling, and a ½ in. x ¾ in. MNPT adapter. If you have any further questions please give out technical service/ product support line a call at 1-800-344-1172.
by|Jul 27, 2020
Q:Can't get tube on fitting
by|Jun 25, 2016
2 Answers
Answer This Question
A: The Barb converter is only necessary if you use 1/4in Mirco Tubing. The delivered 1/8in. Micro tubing fits directly into the Outlets
by|May 4, 2023
A: That 1/8" tube doesn't go on that barb. It goes into the holes instead of the barb. That's why I will be using 1/4" tubing which works on the barbs. I never saw 1/8" drip connectors.