Questions and Answers for DEWALT 15 Amp Corded 13 in. Heavy-Duty 2-Speed Bench Planer with (3) Knives, In Feed Table and Out Feed Table

A:  Hello Faust. Dear Valued Home Depot Customer, to better answer your question, please contact the HD.com customer service department at 800-430-3376 call any day between 6 a.m. and 2 a.m. EST, or call your local store, they can either answer your question or transfer you to your local store to answer your specific question. Thanks, Mitzy DEWALT Social Media Team

A:  The stand and saw shipped separately; both boxes arrived damaged and taped together.  While the saw was seemingly perfect out of the damaged packaging, the stand was both banged up and missing many components.  After making a few calls, I was advised to “make do” with what I had, and send receipts for all components needed to complete the assembly.  Needless to say, I built the stand as I thought it should look—including a shelf—but not sure what was supposed to come in packaging, because even the directions were missing.  I was not remunerated for purchased materials or my time.

A:  The model number on the stand is DW7350. Is the same stand. The lower shelf is not showing in the pictures for some reason, but it should be included.

A:  Your machine is wired for 120 Volts, 60 HZ alternating current. It is not recommended by the manufacturer, DEWALT to attempt to use an adapter or transformer in order to attempt to make the tool work at 240v.

A:  You'll want to shim the spaces on the bottom side so when the roller presses down on it it doesn't bend.

A:  If both sides of your material are very rough or if the material is cupped, bowed or twisted, your planer may not produce the desired result. Ideally, you should have at least one level face/surface on your material before you plane. Your thickness planer will work best with material that has been run through a jointer to produce one flat surface.

A:  It is wise to shim and adhere the board to a flat and true piece using double sided tape or CA glue to produce one flat/clean side, then remove from the jig run the other side thru. If you don't, the board will likely rock through the planer, and if by chance you are able to get a clean side, you will likely eat up lots of material and not get the thickness you are wanting. Hope this helps.

A:  The model number is DW735X.

A:  The model number is DW735X.

A:  We apologize for any inconvenience. If the model starts with DW735 that would be the model number of the planer and they will all be the same. If there are numbers or letters after the model, this is for different kits, accessories etc. DW735 specifications are: Powerful 15 amp, 20,000 rpm motor handles larger cuts in wider materials with ease. Three-knife cutter head with 10,000 rpm cutter-head speed delivers 30% longer knife life and makes knife change faster and easier. Two-speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI.

A:  Hello Vinc. The DW735X Planer has a Depth of Cut: 1/8″ · Depth Capacity: 6″ · Width Capacity: 13″. Thanks Lee DEWALT Social Media Team

A:  The dust port measures 3-15/16" to fit a 4"dust hose.

A:  4 inches

A:  The planer DW735 weighs 91.75 lbs. and the stand 64.8 lbs. Total weight 156.55 lbs