A: Yes, the rack and pinion fence allows for fast, easy adjustment and provides the capacity to rip 4x8 sheet goods.
by|Dec 4, 2023
Q:can the saw be removed from the rolling stand and placed on a scissor stand
by|Dec 2, 2023
1 Answer
Answer This Question
A: Yes, the saw can be put on a scissor stand.
by|Apr 19, 2024
1 found this answer helpful
Q:Can you use the incra sliding miter table
by|Nov 26, 2023
1 Answer
Answer This Question
A: We have not tested the DEWALT DWE7491RS with the Incra brand.
by|Nov 28, 2023
Q:Does it work with 110 or 220 volts
by|Oct 28, 2023
1 Answer
Answer This Question
A: The connection is 120v. It is not recommended by the manufacturer DEWALT to use an adapter or transformer to attempt to force the saw to work at different voltage.
by|Oct 28, 2023
Q:Is it possible to buy just the saw and not the stand?
by|Oct 24, 2023
1 Answer
Answer This Question
A: No. The saw is sold along with the stand only.
by|Oct 24, 2023
Q:What is the maximum dado width this saw can cut?
by|Oct 21, 2023
1 Answer
Answer This Question
A: We do not recommend attempting to stack dado blades thicker than 13/16" (20 mm). Do not use dado blades larger than 8" (200 mm) diameter.
by|Feb 8, 2024
5 found this answer helpful
Q:Is 10 inch blade included
by|Oct 10, 2023
1 Answer
Answer This Question
A: Yes, the DWE7491RS will include a blade.
by|Oct 10, 2023
Q:Does this come with blade?
by|Oct 8, 2023
1 Answer
Answer This Question
A: Yes, the DWE7491RS will include (1) DW3112 blade.
by|Oct 10, 2023
1 found this answer helpful
Q:My recent question referred to the riving knife raising-lowering rod. This is a smooth, non-threaded vertical rod between the motor housing and riving knife. It accumulates dust from the riving knife raising-lowering space left of the rod.
by|Sep 28, 2023
1 Answer
Answer This Question
A: Please contact support at WECARE@sbdinc.com and reference ticket #8192131 so we have all information available from your concern.
by|Sep 28, 2023
Q:What lubricant does DeWALT recommend for the riving knife (Splitter) raising-lowering rod. This is a vertical chrome shaft between the motor housing and the riving knife. Part is not apparent on the parts diagram.
by|Sep 20, 2023
1 Answer
Answer This Question
A: DEWALT recommends to clean and lubricate the height adjustment screw threads on the underside of this saw with general purpose grease.