#1 Home Improvement Retailer

Cart

Cart

Home
Plumbing
Plumbing Parts
Drain Parts
Drains & Drain Parts

Questions and Answers for DANCO Waste and Overflow Gasket

Internet #202950208

Model #88350

Store SKU #684631

Waste and Overflow Gasket
(56)Questions & Answers (10)
  • Gasket help prevent leaks and provide a positive seal
  • Fits between a tub and overflow drain
  • Dimensions: 3-3/16 in. O.D. x 2-1/8 in. I.D.
View Full Product Details

Questions & Answers

10Questions
caret
Q:Will this work on an overflow tube that is 2-3/8 wide?
by|Feb 19, 2024
1 Answer
Answer This Question

A:  Thank you for your interest in Danco products and for your inquiry. Danco model number 88350 has an outside diameter of 3-3-16" and an inside diameter of 2-1/8".

by|Mar 13, 2024
    caret
    Q:how do you use / position this gasket? Should you apply a silicone sealant when installing?
    by|Oct 24, 2022
    1 Answer
    Answer This Question

    A:  Thank you for contacting Danco. Please see the link below to the instructions for product #88350.

    by|Jan 17, 2024
      2 found this answer helpful
      caret
      Q:how thick is the gasket?
      by|Jun 20, 2021
      1 Answer
      Answer This Question

      A:  Thank you for your interest in Danco products. This gasket has 2 thicknesses depending on the side of the gasket. One side is 0.2 inches thick while the other has a 0.53 thickness.

      by|Jan 8, 2023
        1 found this answer helpful
        caret
        Q:Are the dimensions accurate? 3-3/16 in. O.D. x 2-1/8 in. I.D. These are not the typical tub overflow dimensions.
        by|Jun 15, 2021
        1 Answer
        Answer This Question

        A:  Thank you for your interest in Danco products. Yes the dimensions are accurate .This gasket is designed to be adjustable.

        by|Oct 30, 2023
          caret
          Q:Do I need plumbers grease or silicone sealant for this? Looks like my current gasket had sealant all over it.
          by|May 24, 2021
          1 Answer
          Answer This Question

          A:  Thank you for your interest in Danco products. You shouldn't need any grease or sealant if the gasket fits correctly.

          by|May 27, 2021
            caret
            Q:Because my overflow pipe is basically a cap that screws onto pvc, the threaded part of the pvc stick too far into the bathtub for me to replace the gasket from inside the tub, as is typical. Thus, I need to either A) slit the top of the gasket and caulk, or B) cut the PVC and redo the assembly completely. Option A would certainly be easier and more economical.
            by|Aug 8, 2018
            3 Answers
            Answer This Question

            A:  yes, cut it into 3 pieces and it should work.

            by|Jun 17, 2020

              A:  Thank you for your interest in Danco products. Our Danco 88350, Waste and Overflow Gasket, is made for waste pipe applications but we would not recommend altering or modifying the gasket in anyway. You can use silicone caulk around the overflow plate but would not recommend using it on the gasket itself.

              by|Sep 28, 2019
                1 found this answer helpful

                A:  Option A should work fine. you could also add a 2nd gasket in the from with a nut then cut off the excess pipe.

                by|May 5, 2023
                caret
                Q:Does the "thicker" part go to the bottom and the "thinner" part go towards the top? Install instructions and pics do specify heads or tails on this install.
                by|Aug 21, 2017
                2 Answers
                Answer This Question

                A:  Thank you for your inquiry. There is no general area on how this is placed when installing. You will have to locate the opening on the side of overflow plate, the thicker end must match up to that opening.

                by|Dec 13, 2020
                  2 found this answer helpful

                  A:  My gap was largest at the "top" so that's were I ended up putting the thicker part. Tightened down and no more leaking!

                  by|Oct 10, 2020
                    5 found this answer helpful
                    caret
                    Q:The original gasket for my bathtub wraparound the pvc pipe. The question is if the danco gasket will work
                    by|Mar 23, 2017
                    1 Answer
                    Answer This Question

                    A:  Thank you for your inquiry. This gasket is designed to be squeezed between the back wall of the tub and the front of the overflow tube.

                    by|Apr 13, 2024
                      4 found this answer helpful
                      page 2

                      Frequently Bought Together

                      +
                      +
                      Price:
                      $4.16