Q:How do I get the old one off what tool to use? It’s hard to grip it. Thanks
by|Jul 17, 2019
2 Answers
Answer This Question
A: Turn water off, remove handle, use water pump pliers on the bigger collar. Should come right out.
by|Jul 18, 2019
A: Thank you for contacting Danco. We suggest you use a 6-point socket of the appropriate size of the stem to remove the stem.
by|Aug 5, 2019
Q:I believe this is the part that I need, but how do I make sure it's the correct size? Is there s...
by|Dec 29, 2017
3 Answers
Answer This Question
A: You would need to check the part numbers. This is model fits Eljer 4788 faucets.
by|May 5, 2023
A: Thank you for reaching out to us. You will need to pull out your old stem and match it up with this one. If you have a Eljer faucet model 4788 this will be the cold sided stem for you. If you are not sure we suggest taking your old stem up to the store to match the stem with our Perfect Match book.
by|May 5, 2023
1 found this answer helpful
A: Bought this to replace older elger in sink faucet, the O.D. threads are 15/16 20 pitch or measure around .925 and the length of stems to seat is just over 2 inches. 2.050
by|May 5, 2023
Q:Danco, Eljer -- This stem fits my faucet, BUT the stem isn't long enough. The brass 'bonnet' that...
by|Oct 16, 2017
1 Answer
Answer This Question
A: Thank you for choosing Danco products. We do offer a slightly larger stem, model 17198E (http://www.homedepot.com/p/DANCO-5C-1C-Cold-Stem-for-Eljer-17198E/204297665) It is 2.5" long.
by|May 5, 2023
Q:need substitute for 4c-21c and 4h-21-h
by|Nov 26, 2014
1 Answer
Answer This Question
A: Thank you for your inquiry. This should work as a substitute for the 4C-21C stem. For the 4C-21H, use http://www.homedepot.com/p/DANCO-4C-2H-Hot-Stem-for-Eljer-Faucets-15786E/202908698?keyword=15786e