Questions and Answers for DANCO 15/16 in. -27M or 55/64 in. -27F x 3/4 in. GHTM Dishwasher Snap Coupling Adapter

A:  Thank you for your interest in Danco products and for your inquiry. The adapter part number is Danco 10513.

A:  No needs threads otherwise can’t attatch

A:  No. Note threads top and bottom.

A:  sorry no it wont

A:  sorry no, and it will not fit all threaded faucets either, just vary plain looking utility style faucets with a old style round aerator.

A:  Thank you for choosing Danco products. The Danco #10521 15/16 in.-27M or 55/64 in.-27F x 3/4 in. GHTM Dishwasher Snap Coupling Adapter will work for your application.

A:  yes as long as it uses a 3/4 inch hose connection the same as a garden hose.

A:  Thank you for contacting Danco. The GHTM dishwasher snap coupling adapter would be compatible with a Haier portable washing machine as long as the male 3/4 garden hose and the male 15/16-27 or female 55/64-27 align with the connections at hand.

A:  The connection to the washer side is standard fit hoses. (The fitting connects the hoses to the water source) The end that connects to the water faucet is where you need to be careful--size / type of connection. I connected mine to the kitchen sink faucet. You will have to take the end of faucet off. (the part where there's a screen--just inside where the water comes out-should be able to unscrew the ring at the end). The nipple end that comes with your connector will take the place of the ring you just removed. My washer has hot and cold connections-two hoses, so, I had to buy a Y-connection and that fits into the quick-connect fitting. I used: Hoses (mine (2) came with the machine), (1) Y-connection and (1) snap-connect or

A:  Yes--but make sure to have one or maybe even 2 rubber hose washers available and sometime some Teflon tape is necessary to prevent any leaking. Also take care not to exert to much stress on the water faucet connection as these are of a rather fragile nature.

A:  Yes, this fits a standard garden hose and kitchen faucet with threads. If you have a screen on the faucet, you will have to remove it to install the one half of the adapter.

A:  It should, I use a two-way adapter to attach a washing machine hose which is the same size as a garden hose.

A:  The garden hose end should fit. The end that connects to the faucet is where you need to be careful. The nipple end that connects to the faucet -- some faucets may not work or you may need additional adapter-the folks at Home Depot can help with what you need

A:  Thank you for your interest in Danco products. Our Danco 10521, 15/16 in.-27M or 55/64 in.-27F x 3/4 in. GHTM Dishwasher Snap Coupling Adapter, would work for your application if you faucet spout has either 15/16 in.-27M or 55/64 in.-27F aerator installed on it.

A:  This is part number 10521.

A:  Model # 10521 Internet #204321962

A:  Internet #204321962 Model # 10521

A:  Thank you for your interest in Danco products. The part number or model number for this adapter is 10521.

A:  Not for SPT portable dishwasher as recommended. SPT wants you to buy their their proprietary adapter which is poorly made, leaks, and costs $30 delivered. Poor Chinese business decision on their part.

A:  Thank you for your inquiry. Assuming that your hose is the standard 3/4 in. Garden Hose thread, it should work.

A:  Yes. I connect an LG washer/dry to my kitchen sink. I had to add a two-way adapter for a hot and a cold hose.

A:  Yes I had a portable Dishwasher years ago and this should have know trouble connecting.

A:  Yes, I have used a similar adapter for just that reason. Works great.

A:  yes as long as it uses a 3/4 inch hose connection the same as a garden hose.