Questions and Answers for Clopay Classic Steel Short Panel 8 ft x 7 ft Non-Insulated Almond Garage Door without Windows

A:  Hi David, the springing weight on this door is 107lbs. Any residential opener (with a 8' extension kit) will work for this door since the springs do the actual lifting of the door and opener really just gets it moving and maintains speed/limits. Whatever bells and whistles you want in your opener is up to you but any residential opener will work. Thanks for shopping the Home Depot, the Clopay team

A:  Hi Ruben. We are not sure how that works with exports so I would advise that you contact an export facility in Miami and see if they can do it. Thanks for shopping the Home Depot, the Clopay team

A:  Hi Height, for this model door the section sizes are as follows from the bottom to top: 21", 18". 18". 18", 21". Thanks for shopping the Home Depot the Clopay team.

A:  Chris, the rough opening will depend on the thickness of the material you use to finish the opening. The finished opening should match the door dimensions. Thanks for shopping The Home Depot, The Clopay Team

A:  Jake, This door does also come as a 9' x 7'.6". That would work better for you. You can shop, www.homedepot.com/garagedoors, enter your zip code and select the size that works best for you. Thank you for shopping the Home Depot, the Clopay team.

A:  Cori, there are 2 options here. 1) You can special order the door with EZ Set Torsion by visiting www.homedepot.com/garagedoors and designing your door. At the end of the DIY process you will have the option to upgrade the spring system. 2) You can order an EZ Set Torsion Conversion Kit. We offer multiple options of this kit on homedepot.com. Thanks for shopping The Home Depot, The Clopay Team

A:  Hi Steve, In our industry we go by width first and then height and you want the "finished opening" to be the same as the door you are installing (or just slightly smaller). Thanks for shopping the Home Depot, the Clopay team

A:  Hi, You want to make your "finished" opening the same size (or just slightly smaller) than the door you want to install. You will need to calculate whatever you are using as finished material into the rough opening size in order to calculate your rough framing. The perimeter weatherseal is then applied to the "finished" opening to seal the door to the frame. Thanks for shopping the Home Depot, the Clopay team

A:  Hi RonnieCondrey, You want you bucks to 8' x7' of just slightly smaller so the door seals once the perimeter waether seal is installed. Thanks for shopping the Home Depot, the Clopay team

A:  Hi Spencer, the door comes with all new track, springs, hardware for installation. Separate items you may need to purchase are back hang material and perimeter weatherseal if needed. Thanks for shopping the Home Depot, the Clopay team