Questions and Answers for Cerrowire 50 ft. 6/3 Black Stranded CerroMax SLiPWire Copper NM-B Wire

A:  Please contact your local electrician for codes for this application.

A:  Ampacity is the maximum current that a conductor can carry continuously under the conditions of use without exceeding its temperature rating. Current is measured in amperes or “amps.” You must use the correct size wire for the current (load) requirement of the circuit to prevent the wire from overheating. The number and type of electrical devices connected to a circuit determine the ampacity requirement of the conductor. Usually, a general-purpose house circuit is designed for 20 amps. Lighting circuits may be designed for only 15 amps To calculate the load requirement for a circuit, first add up the wattage of all the electrical devices that will be on the circuit. Then, divide the total wattage by the voltage of the system, typically 120 or 240, and that will give you the required current or amps. It is the sole responsibility of the end user to determine suitability of this product for its intended use and application.

A:  3/4? would be on the tight side. 1? would be better

A:  Since it is 6/3 with a ground wire, yes. That is what I am using it for. Working great.

A:  Mig 215 welder supports a max input of 30 amps on 230 VAC. This cable which is rated to 50 amps would support that.

A:  Yes, the Cerrowire 6/3 NM wire is rated up to 55 amps.

A:  Yes, the 6/3 Black Stranded CerroMax NM-B wire will work with a 50a charger.