Q:Can this flooring be installed under kitchen cabinets?
by|Mar 26, 2024
0 Answer
Answer This Question
Q:to what extent are there VOC's
by|Aug 21, 2021
1 Answer
Answer This Question
A: Hello Kate,
These products go through a finishing process at the factory that uses several coats of a 99.9% solid urethane coating. The coating is cured via ultraviolet light at the factory site. This process essentially eliminates the VOC off-gassing from the finished product. The UV/EB cure process that AHF Products uses has been recently recognized as having significant environmental benefits over traditional thermal cure processes. Measured Concentration of Total Volatile Organic Compounds (TVOC): Less than/equal to 0.5 mg/m. We are also Floor Score Certified and we do have this information listed on our website under resources/certificates. I hope this information is helpful. Have a great day.
by|Aug 23, 2021
Q:How do I get a sample of this flooring?
by|Nov 25, 2020
1 Answer
Answer This Question
A: Hi Dan,
Thank you for reaching out to us with your question.
We are happy to tell you that samples of the Bruce - American Vintage - Mountainside can be ordered directly from The Home Depot's website.
The model number of the sample is: BR-662679
For your convenience, please visit the following link to view the details of the sample:
https://thd.co/39xCRjV
You can also have a sales associate at your local The Home Depot order a sample for you, from their Contemporary Marketing Group.
We hope that this information is helpful. Have a great day.
by|Dec 2, 2020
Q:Does the floor need to acclimate to the house before installing it? if so for how long
by|Oct 27, 2020
1 Answer
Answer This Question
A: Hey there Euegne! Great question! Although it is not necessary to acclimate engineered flooring, it is best to store it in the environment in which it is expected to perform prior to installation. Be sure to check the adhesive label for adhesive storage limitations as well. If you have any further questions, please feel free to contact us again by e-mail at productsupport@ahfproducts.com or by phone at 1-866-243-2726 Monday through Friday, 9 AM - 4:30 PM EST. Additional information may also be found at our technical website www.hardwoodexpert.com.
by|Oct 28, 2020
Q:how to you order stair nose to match
by|Oct 24, 2020
1 Answer
Answer This Question
A: Hey there Euegne! Thank you for your interest in our hardwood flooring. Trim for this Home Depot exclusive collection are supplied to Home Depot by Zamma. Your local Home Depot associate would be able to find and order the recommended trim. If you have any further questions, please feel free to contact us again by e-mail at productsupport@ahfproducts.com or by phone at 1-866-243-2726 Monday through Friday, 9 AM - 4:30 PM EST. Additional information may also be found at our technical website www.hardwoodexpert.com.
by|Nov 2, 2020
Q:I’m a little confused if it’s a click and requires an under layment why nail, staple or glue,if i have to glue what should i use for a glue?
by|Aug 13, 2020
1 Answer
Answer This Question
A: Hi Bob,
Thank you for reaching out to us with your question. Natural beauty of hardwood never goes out of style.
The Bruce - Engineered - American Vintage - Scraped - Mocha is a tongue and groove product. In order to float this product, you will need to use a Premium Underlayment For Floating Engineered Hardwood and the Bruce Everseal Floating Floor Tongue & Groove Adhesive to glue the joints.
For your convenience, please visit the following link to view the full installation recommendations for our engineered hardwood products.
https://bit.ly/342x5UR
We hope that this information is helpful. Have a great day.
by|Aug 13, 2020
Q:I need a flush 3/8"stair nose to go with the Bruce American Vintage Scraped Highland Trail Oak engineered hardwood flooring. Having no success finding what I need. Any suggestions?
by|Aug 4, 2020
1 Answer
Answer This Question
A: Dear Valued Customer,
Thank you for reaching out to us with your question.
We apologize for the inconvenience, but we do not manufacture the trims for the American Vintage flooring collection. A sales associate at your local The Home Depot will be happy to contact their trim vendor - Zamma for assistance in finding the best coordinating trim.
Again, we apologize for the inconvenience and hope that this information is helpful. Have a great day.
by|Aug 6, 2020
Q:Is there a way to get samples of some of the colors?
by|Apr 27, 2020
1 Answer
Answer This Question
A: Hi Kristin,
Thank you for reaching out to us with your question.
We are excited to tell you that you can order samples directly from The Home Depot's website. Simply click on the "Add Sample To Cart" button located on the right hand side of the photo of the flooring. You can have the sample shipped directly to your home or to the store.
Please know that a sales associate is also able to order a sample on your behalf, directly from their Contemporary Marketing Group.
We hope that this information is helpful. Have a great day!