Q:Is the duct on the long or short side of the housing?
by|Jun 14, 2022
1 Answer
Answer This Question
A: Hi Lisa,
Thank you for your question on the QTXEN080 ventilation fan. According to the specifications, the housing size measures 10-1/2" x 11-3/8". The duct is on the 11-3/8" side. This can be seen on the product page for the QTXEN080 on the Broan-NuTone website.
by|Jun 14, 2022
Q:can I replace the cover grille with a decorative one that is 14 x 14 inches?
by|Jun 2, 2022
1 Answer
Answer This Question
A: Hi Lwat,
Thank you for your question on the model QTXEN080. The only upgrade grille we offer for this model would be the FG701S.
by|Jun 3, 2022
Q:Is there a replacement motor that will fit the QT-110N-A housing?
by|Apr 15, 2022
1 Answer
Answer This Question
A: Hi Andrew,
Thank you for your question on the model QTXEN110 ventilation fan. The correct motor assembly for your QT110N-B unit is 0696B000. This part will include the motor, blower wheel, and motor mounting bracket all completely assembled for you.
by|Apr 18, 2022
Q:Can i replace a QT-110N-B with this
by|Apr 4, 2022
1 Answer
Answer This Question
A: Hi Mark, Thank you for your question on model QTXEN110. This is not the recommended replacement for the QT110N-B. The suggested replacement for your unit is model AE110K. This is based on performance only as this unit has a different housing.
by|Apr 5, 2022
Q:Can I replace my QTXEN110-C with this model?
by|Jan 1, 2022
3 Answers
Answer This Question
A: Hi Gravy,
Thank you for your question on the model QTXEN110. The current model QTXEN110 would still use the same size housing as your QTXEN110-C model. Some of the internal parts are different, but it would be an exact change to remove the old and install the new.
by|Jan 5, 2022
A: The dimensions aren’t identical but it fit with some minor carpentry.
by|Jan 3, 2022
A: The new fan should fit right up in where your existing is now. Make sure you place it with the fan vent in the same position as your existing fan. If you are putting it in an attic space like I did you just have to place it near the exhaust ducting. I looked your fan up and it looks like it should fit. You can go to repair clinic and check it out. The web address is: https://www.repairclinic.com/ProductDetail/959988?tab=diagrams
Good luck my friend.
by|Jan 4, 2022
Q:I have the QTRN080-A model. The motor is bad. Is there any replacement for this model without taking the whole thing out?
by|Nov 12, 2021
1 Answer
Answer This Question
A: Hi Katie,
Thank you for your question on the model QTRN080-A ventilation fan. The part number for the blower assembly for this model is 97016621. This will include the motor, blower wheel, and motor mounting plate all completely assembled for you. The motor only is not available by itself, only as the complete assembly. Your local Home Depot store can order this part number for you. It can also be ordered from the Broan-NuTone website in the Parts Store.
by|Nov 15, 2021
Q:Can this be used as a replacement for nutone qt-90n-b model? Will it fit in the same space?
by|Nov 6, 2021
1 Answer
Answer This Question
A: Hi Robin, Thank you for your question on model QTXEN110. Unfortunately, there is no direct replacement for that model. The suggested replacement is model AEN80B. This is based on performance only. If you have any specification, application or installation questions, please call our technical department directly at 888-336-6151.
by|Nov 8, 2021
Q:I have an old NuTone Model 8832N (1991) the housing is 9" x 7.5" and the depth is about 4". Can you recommend a good replacement?
by|Oct 27, 2021
1 Answer
Answer This Question
A: Hi Justin, Thank you for your question on model QTXEN080. Unfortunately, we no longer manufacture units with that housing dimension. The 8832N used a 3" duct so that limits the replacement options unless you would like to change ductwork. The models we currently have with 3" duct are 671, 695, 771 and E070.