Questions and Answers for BrassCraft 3/8 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve

A:  Your answer to tell me to call 877-277-7755. The number is an AI voice ads, not BrassCraft. I saw that this same number were also given to others posts as well. Shame on you.

A:  Hello, Thank you for your question. We would require more information to determine if our Connector (or other product) is designed for that use. Please contact our Customer Support Team at 877-277-7755 and reference this review.

A:  Hi James, Thank you for your question. If your original installed shut off valve is has reached it's useful life, we recommend replacing the entire shut off with a new one. We really would require more information to determine what your application is. Please contact our Customer Support Team at 877-277-7755 and reference this review.

A:  No, one is 3/8" national pipe thread and the other is a 3/8" compression fitting for tubing or a flexible hose. They are quite different.

A:  Hello jst - Thank you for your question. Yes our valve has inside threads and for use with household plumbing fixtures - faucets, toilets, dishwashers, icemakers, washing machines, etc. If you have any questions or have any other feedback, please contact our Customer Support Team at 877-272-7755.

A:  Yes, the fitting is compatible with the standard flexible connector line. If your line is not a metal one, may I suggest you consider getting a metal line when you pick up the shut off valve. When it comes to water pipes and fittings, you cannot be too careful.

A:  I believe you are going to find that the ends are not compatible in size. IF they were, stacking them instead of removing the old one is not an issue. Not sure why you don't want to remove the old one though. If it won't turn off now, then you still have to turn off the main water valve to add another shutoff. With half of the process already complete, spend two more minutes to unscrew the old shutoff, use nylon plumbing tape on the pipe threads, and screw the new fitting onto the pipe as it should be. You will feel much better about the project afterwards.

A:  The one side is a femail threaded connection. The other is a pressure fitting which I didn't use. I was able to attach the the flexible supplie line to the Mail theded connection under the.pressue fitting. So if you goi from mail to femail threaded or mail to pressure fitting you'll be fine. I would however,, suggest that you remove the old valve. The more connections you have: the more opportunity you have for leaks or blockages.

A:  Thank you for your questions. The G2 Series and the KT Series, both are ¼ turn water stop and Lead free. The difference between this valve are: ¼ Turn Water Stop: Our G2 series offers durable contraction and proven performance with its technology. It has a one piece shut off mechanism which provides smooth operations without freeze ups even after periods of non-use. Machined one-piece body provides strength, and long lasting durability. 100% leak tested before it leaves the factory and No Lead. Operating specification: Temperature: 40° – 160° F Pressure: 125 PSI maximum. ¼ Turn Ball Water Stop: Our KT series, is a full brass stop with a machined bras ball valve specially engineered and matted with a PTFE seats to provide smooth operation without freeze ups even after long periods of non-use. Two high-performance o-rings to withstand high temperatures and harsh water environments. 100% leak tested before it leaves the factory. This stop can be used on recirculatory hot water lines and No Lead. Operating specification: Temperature: 40° – 180° F Pressure: 125 PSI maximum. So as you can see this is personal preference on which one you feel would work best for you. If you have any other questions, please contact our Customer Support Team at 877-272-7755 for assistance.

A:  Hello datguy - Thank you for your question. Yes, this is for use in potable water distribution systems. If you have any questions or have any other feedback, please contact our Customer Support Team at 877-272-7755.

A:  Hi Phlebite, installation instructions may vary depending on the type of inlet you are using. We would be happy to walk you through the installation process once we get additional information. Please call one of our Customer Service Representatives toll-free at 877-272-7755. We look forward to assisting you.

A:  Turn off the main water supply to the line (usually the main for the property. Remove the old one using a couple of wrenches (plumber's, adjustable, mechanic, etc.)--one to hold the shut off valve to loosen it and one to hold the pip which the valve is attached to. After removal, wire brush the threads from the pipe clean to remove old, residual tape/sealant, and reapply new teflon pluming/pipe tape. Then install the new one.

A:  Watch a YouTube video

A:  All pipe and pipe fittings have been lead free for many, many years.

A:  It's most probably 99% lead-free free

A:  Yes, this valve is lead free.