Questions and Answers for Bosch Table Saw Dust Collector System

A:  My purchase does not fit my Dewalt saw

A:  The TS1004 Dust Bag is designed for use with the Bosch 4000, 4100, GTS1031, and GTS1041A table saws. It also can be used with other table saws that have 2-1/2 inch dust ports on the exterior of the saw (regardless of brand). For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  This TS1004 Dust Bag has the capacity of 0.34Ft³. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  Approximately 9 inches by 29 inches with zipper at bottom and pressure clamp at top to attach to Bosch table saw. If the clamp is at the wrong angle it is hard to get at the release tabs on the clamp. Also need to free the exhaust tube of clogs of sawdust and wood particles.

A:  Thank you for your question. I apologize but the information regarding the micron rating is unavailable. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  This TS1004 Dust Bag is for Bosch 4000, 4100, GTS1031, and GTS1041A table saws. For other brands, as long as it has 2-1/2" dust port this bag should work. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  If the outlet on the saw is the same size as the Bosch saw it will work. Look for the size on the description of the item, it should give you a measurement.

A:  I had a similar problem, but with a Dewalt brand table saw which I was using this product on. I use a 2 1/2" dust collection system adaptor to make it work.

A:  Maybe there is. It would not fit the discharge port of my Bosch saw. It works great in my Porter Cable jointer. Very happy with this alternate use, but very disappointed about the Bosch saw.

A:  The TS1004 Dust Bag is designed for Bosch 4000, 4100, GTS1031, and GTS1041A table saws and for other saws that have a 2-1/2 In. dust port on the exterior. Please contact us at 1-877-267-2499 to discuss the experience. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  Thank you for your question. The TS1004 Dust Bag is reusable. You need to dispose once it's 2/3rd's full. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  They are reusable. Dump out the shavings when full and start again.

A:  They are made of heavy cloth...unlimited uses...I would expect mine to last as long as the saw does.

A:  They are reusable just empty after using it and your ready for the next job

A:  Yes, there is a zipper on the bottom.

A:  It will fit an exhaust port up to 2.5 inches.

A:  Thank you for your question. The TS1004 Table Saw Dust Bag is compatible with Bosch 4000, 4100, GTS1031, and GTS1041A table saws only. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  Thank you for your question. The TS1004 is designed for our Bosch Table Saw models GTS1031, 4000 and 4100. We have not tested compatibility with other manufacturers table saws. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  I bought it for a Dewalt job site saw