Q:When ordering 2-5/8 in. Carbide SDS-Max Rotary Hammer Core Bit for Masonry and Concrete Drilling (2-Piece) by saying "2-piece" does that mean x 2 core drill bits ?
by|May 24, 2022
1 Answer
Answer This Question
A: Hi there! When you say 2 piece core bit, it means it is a set of core drill and the shank (pilot bit). For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
by|May 24, 2022
Q:What size Allen screws are used to set the guide bit
by|Dec 21, 2020
1 Answer
Answer This Question
A: Hi there! The HC7503 doesn’t have an Allen screw. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
by|Dec 23, 2020
Q:Can I rent this core bit?
by|Jun 20, 2018
1 Answer
Answer This Question
A: Not at a Home depot rental center to my knowledge, perhaps for some other rental rental center. I know most rental centers only sell blades/ bits since wear can be beyond renting again, so only sell them.
by|Aug 14, 2019
1 found this answer helpful
Q:Will this core through blue stone and red brick? Does water need to be used when drilling? Thank you.
by|Nov 3, 2016
2 Answers
Answer This Question
A: Yes. It will bore through CMU so it should do what you need. Water is optional to keep dust down but not needed for cooling of the bit.
by|May 4, 2023
1 found this answer helpful
A: Thank you for your question. The HC7503 core bit is designed for drilling into concrete and masonry so it should work for your application. Water is not needed when using these bits.
by|May 4, 2023
Q:can this bit be used in a standard 1/2" electric drill
by|May 4, 2016
3 Answers
Answer This Question
A: Thank you for your question. The HC7503 core bit is designed for use only in an SDS Max rotary hammer. The bit will not work with a regular drill chuck.
by|May 3, 2023
A: This can be used.
by|May 3, 2023
A: No
by|May 3, 2023
Q:I need a new centering bit and lockscrew, what are the sizes and where can I get them
by|Dec 18, 2015
1 Answer
Answer This Question
A: Thank you for your question. The part number for the centering bit is HC88, this is a 1/8" bit.
by|May 3, 2023
Q:I need a 31/2 " dia. bit
by|Jul 4, 2015
1 Answer
Answer This Question
A: The HC7503 includes the core cutter and pilot bit. The shank is sold separately, we offer two lengths: CAM008 is 8 inches and CAM018 is 18 inches. We offer the following core bit sizes: 1-3/4", 2", 2-1/2", 3", 3-1/2", 4", 5" and 6". The part number for the 3-1/2" bit is HC7505
by|May 3, 2023
Q:I have a rotor hammer drill with a SDS chuck. I want to core into concrete
it is unclear if this bit includes the shank (2-piece) or does it include something else. can you please advise what parts I need - do I need the core bit and a shank or is this a complete assembly.
thank you.
by|Aug 10, 2014
2 Answers
Answer This Question
A: Thank you for your question. The Bosch HC7503 is the actual core bit with centering bit only. You would also need the SDS Max core bit shank (sold separately). We offer two sizes. #CAM008 is 8" long and #CAM018 is 18" long.
by|Aug 14, 2019
1 found this answer helpful
A: I do core drills on sidewalks will this make a 2 1/2 inch hole