Questions and Answers for BEHR Premium Advanced DeckOver 5 gal. #SC-109 Wrangler Brown Smooth Solid Color Exterior Wood and Concrete Coating

A:  Hi Kanella, thank you for your question. Yes, our Textured DeckOver No. 5005 can be tinted to Atlantic SC-101. Have a great day! -Giovanna

A:  Hi Pablo, thank you for your question. The DeckOver can be applied to wood and concrete using an airless sprayer and is generally recommended for experienced applicators. Have a great day! - Randy

A:  Hi Linda, thanks for your question. Yes, our Advanced DeckOver is available in other colors. I recommend checking your local Home Depot store for a brochure or looking at our website for a list of colors. Have a great day! -Christina

A:  Hi AJSa, thank you for your question. Our DeckOver can be used over a previously coated surface so long as the previous coats are in good sound condition. If that is not the case, it may be best to remove the coats before applying our DeckOver to ensure the best performance and longevity. Have a great day! -Lina

A:  Yes, it can be as long as the ramp has “cured” and lost its “green”. DO NOT APPLY ANY KIND OF PAINT OR STAIN IF IT HASNT PROPERLY CURED

A:  Hi Kary, thank you for your question. As it turns out, we do not recommend our products for plywood floors or ramps. I recommend reaching out to your local Home Depot for more information about a coating that will work for your surface. Have a great day! -Lina

A:  Hi Donald, thank you for your question. We do not recommend using a sealer before applying DeckOver to bare concrete. However, you'll want to ensure that the concrete has been cleaned and etched until it feels like 150-grit sandpaper to promote adhesion. Good luck with your project! -Giovanna

A:  Hi Jimm, thank you for your question. We recommend prepping surfaces with our All-In-One Wood Cleaner No. 63. The cleaner will remove mill glaze and prepare the surface for the coating to adhere better. Good luck with your project! -Giovanna

A:  Hi James, thank you for your question. Yes, the DeckOver will work on pressure treated wood once dry. After using the All-In-One Wood Cleaner, allow the surface to dry for 1-2 days before applying. Good luck with your project! -Giovanna

A:  Hi LaconicBob, thank you for your question. We recommend applying the Advanced Textured DeckOver using a 1/4-inch to 1/2-inch nap-size roller cover for a textured finish. An extra textured roller cover can be used to achieve an added textured finish. Have a great day! - Randy

A:  Hi Billie, thanks for the question. We don't recommend using our Advanced Deckover on plywood floors. Have a great day! -Ronald