Questions and Answers for BEHR Premium 1 gal. #PFC-42 Flintridge 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint

A:  Hi Momcat, Thank you for your question. You can use our 1-Part Epoxy Paint for your concrete balcony floor. I hope this was helpful, and best of luck. -Edith

A:  HI terry, The 1-Part Epoxy Concrete & Garage Floor Paint cannot be applied to wood surfaces. However, we do have products that are more suitable for your project. You can visit our website and check out the Solid Color Wood Stain, and also take a look at all of our other wood products. Best regards, Takhari

A:  Hello Vader, Thanks for reaching out. "The James Test" is used to determine the coefficient of friction for a floor surface. All Behr floor coatings pass the standards for a walking surface established for this test. Please note that this does not mean the floor coating will prevent slips or falls, especially if it is wet. I hope this information helps. Best, Roxana N.

A:  No, this paint is for porous surfaces.

A:  Hello Blinga, Thanks for writing in. The 1-Part Epoxy isn’t recommended for linoleum flooring. I recommend reaching out to a floor coatings specialist for a suitable product recommendation. I hope this helps. Best, Roxana N.

A:  Hi lla, Thanks for writing in. The 1-Part Epoxy can be tinted to Flintridge PFC-42, and there are different colors available as well. You can visit our website to check out all of the color options. Best regards, Takhari

A:  Hi Paha, Thanks for writing in. The 1-Part Epoxy Concrete and Garage Floor Paint should be applied within temperature range on the label (between 50-90F & 10-32C). When applying the product towards the lower end of the temperature recommendation, the coating must dry for 24 hours if it's expected to drop below the range. So as long as you're within range (during application and within the first 24 hours), it'll take about 2 hours or more to dry to the touch and 4 weeks to fully cure. I hope this helps. Takhari

A:  Hello Doc, Thanks for writing in. The dry time to touch is one hour or more and 4-6 hours to re-coat. Allow seven days before subjecting to automotive tires. I hope this information helps. Best, Roxana N.

A:  This paint takes 120 minutes to dry.

A:  Hi Pete, Thanks for reaching out! New concrete should cure for at least 30 days before a coating is applied. Hope this helps! ~Doris

A:  Hi Miranda, Thanks for writing in. Yes, The 1-Part Epoxy is ideal for horizontal surfaces such as a basement floor. I hope I’ve addressed your concern. Happy painting. Roxana N.

A:  Yes, it can be used in a basement.

A:  Hi Jeannie67, Thanks for writing in with your question. Our 1-Part Epoxy paint is not a waterproofer. If your concrete is uncoated, you will want to etch it and prime it with our Concrete Bonding Primer, (No. 880) before painting it. I hope this information helps. Have a nice day! Regards, Giovanna