Questions and Answers for BEHR Premium 1 gal. #PFC-42 Flintridge 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint

A:  Hi barb, You're definitely on the right track with 1-Part Epoxy. To see more colors, you can enter "1-Part Epoxy" in the search bar and scroll down. Desert Sandstone PFC-28 is a beautiful beige option. Best of luck with your project! ~Doris

A:  Hi Box3r, Thank you for your question. Our 1-Part Epoxy Paint is mildew resistant. I hope this was helpful. -Edith

A:  Hi AAron, Thanks for your interest in our products! The 1-Part Epoxy Paint is weather resistant, but it is not considered waterproof. The only product we have that is considered waterproof is our Masonry Waterproofing Sealer: https://thd.co/2FISgiC However, this product can not be used to top-coat any paints or stains, and can only be applied to bare concrete. I hope this was informative, and please feel free to reach out directly to our Customer Care Department if you have any other questions or concerns. Have a good day, and best of luck with your project - Vince

A:  Hi john, we do not recommend applying the 1-Part Epoxy Concrete & Garage Floor Paint on vertical surfaces, so you shouldn't use it on your basement walls. It's best to use it on floors. However, you can use the Premium Plus Ultra or Marquee Interior for on your basement walls. Best regards, Takhari

A:  Hi Jiminga, Thanks for your interest in our 1-Part Epoxy Paint! The paint cures to a very durable finish, and would definitely stand up to harsh weather conditions. It is fade and high moisture resistant, and also has UV protection as well. It is also resistant to abrasions and scuffing, so this paint should hold up fairly well. I hope this was informative, and feel free to reach out to our Customer Care Department if you have any other questions or concerns. Have a good rest of your day, and best of luck with your project - Vince

A:  Hi Nita, Thanks for your interest in our products. The 1-Part Epoxy Paint should not be directly applied to oil based stains and finishes. The current coating will need to be removed before preparing for the Epoxy Paint. However, if you aren't able to remove the product, then a primer will need to be applied before using the Epoxy Paint. I would suggest something like the Multi-Surface Primer & Sealer: https://bit.ly/2N6fmDC. I hope this helps, and please feel free to reach out to our Customer Care Department if you have any other questions or concerns. Have a good rest of your day, and best of luck with your project - Vince

A:  Hi Bill, Thank you for your question. Our 1-Part Epoxy Paint can withstand de-icing salts. However, if the salts leave a white residue, clean the surface to remove it. I hope this was helpful. -Edith

A:  Hi MY33771, Thank you for your question. Our 1-Part Epoxy Paint can be custom matched with the color swatch. I hope this was helpful, and best of luck. -Edith