A: No. the aeartor is integral to the pullout sprayer.
by|Mar 23, 2023
Q:How to remove strainer at the mouth of the faucet. It needs cleaning because it spews water everywhere.
by|Jul 13, 2013
1 Answer
Answer This Question
A: The aerator is not a removable part, the hand spray will need to be soaked in white vinegar water to clean the screen.
by|Mar 23, 2023
Q:Are your faucets 100% American Made with no parts from out side America?
by|Nov 13, 2011
1 Answer
Answer This Question
A: No. The faucets do not meet "made in the USA".
by|Feb 8, 2018
Q:I HAVE A COLONY SOFT 4175.100 , IT'S LEAKING AROUND THE ESCUTCHEON CAP WHEN TURNED ON , I REPLACED THE CARTRIDGE -023529-0070A AND I STILL HAVE THE SAME PROBLEM. IT LOOKS IF I REPLACE THE O-RING WILL THIS STOP THE PROBLEM? IT LOOKS IF THE O-RING WAS BAD IT WOULD LEAK INTO THE CABINET BELOW. NEED SOME HELP OR HAVE I GOT A BAD NEW PART?
by|Aug 30, 2011
1 Answer
Answer This Question
A: The cartridge should have stopped this leak, I would suggest making sure the brass manifold was clean and clear of any mineral deposits. If this does not solve the problem I would try the o-rings as well as a new cartridge.
by|Feb 8, 2018
Q:what is the height of the lever when fully raised?
by|Jun 24, 2011
1 Answer
Answer This Question
A: The overall height of the faucet when the handle is fully raised is approximately 9-13/16"
by|Jul 17, 2018
Q:Does this faucet come WITHOUT the sprayer? We have very hard water and I don't want more parts that will only get clogged with calcium.
by|Jun 15, 2011
1 Answer
Answer This Question
A: Unfortunately this faucet does not come without the spray.
by|Jul 17, 2018
Q:DO YOU NEED 2 HANDS TO PULLDOWN THE FAUCET END TO CHANGE FLOW FROM SPRAY TO REGULAR FLOW?
by|Apr 30, 2011
1 Answer
Answer This Question
A: no...you don't even have to pull it out to change the flow.
by|Mar 23, 2023
Q:I am replacing the hose on a pull-out faucet and cannot get it through the plastic guide.
by|Sep 12, 2010
1 Answer
Answer This Question
A: Ensure the faucet body is in its centered position. Also ensure the supply lines are parallel to the back edge of the sink. This will allow for the proper alignment necessary to install the hose.