Q:I am looking for a 24 inch x 18 inch vanity, but could go 24 x 21 inches. Will this sink fit?
by|Feb 21, 2017
2 Answers
Answer This Question
A: You will need to contact the manufacturer for this information.
by|May 4, 2023
A: The sink with Tim is 23" wide; therefore, a 24" wide cabinet is needed for this sink. This would not allow for any counter top surface. I would plan on a minimum 30" wide cabinet.
by|May 5, 2023
Q:What are the recommended cut out dimensions (they are not listed on the data sheet)?
by|Oct 15, 2016
2 Answers
Answer This Question
A: Template is included, which we have thrown away. That being said, the cut out allows for
1/4-3/8" overhang; translate to 22 1/2" wide and 17 1/2-18" front tho back.
by|May 5, 2023
A: The cut out dimension are on the actual box of the sink when you purchase that sink.
by|Mar 28, 2019
Q:Products to use to clean American Standard Town square lavatory?
by|Jul 30, 2016
1 Answer
Answer This Question
A: For general cleaning of china, we recommend Tilex Bathroom Cleaning Products® or hot soapy water and liquid dishwashing detergents, like Dawn or Palmolive. Please DO NOT use abrasive products. In your bowl, you may use The Works cleaner to remove bacteria. Please make sure to apply all cleaning products with a soft cloth or sponge.
by|Feb 8, 2018
Q:We have a cut out that is 18-1/2" front to back and 20-1/2" wide . Will this sink fit?
by|Feb 26, 2016
1 Answer
Answer This Question
A: No this model would not work as the nominal dimensions for this sink is
23-1/8" x 18-3/4" (587mm x 476mm)
by|May 3, 2023
Q:What are the outside dimensions of this sink? What are the inside of the "bowl" dimensions of this sink?Thank you.
by|Jan 31, 2016
2 Answers
Answer This Question
A: The outside dimensions are 23 1/8" x 18 3/4" and the bowl dimensions are 18 1/12" wide, 10 1/2" front to back and 6 1/4" deep.
by|May 3, 2023
8 found this answer helpful
A: The outside dimensions are 23 1/8" x 18 3/4" and the bowl dimensions are 18 1/12" wide, 10 1/2" front to back and 6 1/4" deep.
by|May 3, 2023
5 found this answer helpful
Q:What are the cut out dimensions of the 0700.004?
by|Nov 29, 2015
1 Answer
Answer This Question
A: Nominal Dimensions:
23-1/8" x 18-3/4" (587mm x 476mm)
Bowl Sizes:
18 1/2" (610mm) wide
10 1/4" (260mm) front-to-back
6 1/4" (159mm) deep
by|Mar 23, 2023
Q:my cut out size is 19 side to side and 15 front to back - will this fit?
by|Jul 29, 2015
1 Answer
Answer This Question
A: This sink will not fit in this cut out.
by|May 3, 2023
1 found this answer helpful
Q:What are the faucet hole diameters??? ( they are not on the spec sheet). Pls confirm the drain hole diameter is 1 3/4" Thx Doug
by|Jun 19, 2014
1 Answer
Answer This Question
A: Please contact our customer care line at 1-800-442-1902 for assistance.
by|Feb 14, 2021
Q:I'm looking to replace an American Radiator & Standard Sanitary bathroom sink, model number P3000, size 20x18. Any recommendations from American Standard?
by|Apr 17, 2014
1 Answer
Answer This Question
A: Please contact our customer care line at 1-800-442-1902 and one of our reps will be happy to assist you.
by|Feb 14, 2021
Q:I'm looking for a rectangular sink. The maximum width of the cutout is 19.5 inches. Do you have any sinks that would fit?
by|Apr 5, 2014
1 Answer
Answer This Question
A: Please refer to the following link for our bathroom countertop sinks, all dimensions will be listed on the spec sheet.
http://www.americanstandard-us.com/products/searchResults.aspx?&pc=2&p=1&so=pricehightolow&di=0&a=(100),&t=2&r=25#