Q:Will this American Standard sink, match color wise my American Standard champion 4 new toilet?
by|Jan 20, 2019
1 Answer
Answer This Question
A: Yes, as long as the toilet is white it will match. -American Standard Tech Team
by|Jan 21, 2019
Q:This ridiculous: 3 different dimensions shown on different pages for this sink. Inches outer ege.front to back, please.
by|Jul 27, 2018
1 Answer
Answer This Question
A: QinVA: The sink dimensions themselves are 23-1/8" X 18-3/4", if you scroll down to the info and guides section there is a link to the product specification sheet, this sheet has all the correct dimensions. Sorry for any of the confusion. Sincerely American Standard Technical Team.
by|Mar 28, 2019
Q:my opening is 20 1/2" wide and 18 1/2' deep- would this unit fit? If not can you recommend a model that would? Thank you
by|May 27, 2018
3 Answers
Answer This Question
A: Matt, we can not recommend this as the cut out is smaller for the Town Square Model.- American Standard Tech Team
by|May 5, 2023
A: Compare your dimensions with those of the sink, if they do not exceed the dimensions of the sink it should fit. I had to bevel my edges of the vanity to accommodate the sink but it dropped in perfectly. Be sure to caulk under the rim.
Rf
by|May 5, 2023
A: Yes, it will fit. just be cautious adjusting and sealing around the sink.
by|May 5, 2023
Q:Is it available in almond?
by|Feb 20, 2018
1 Answer
Answer This Question
A: This particular sink is only manufactured in white.
by|May 5, 2023
Q:sink dimensions
by|Dec 30, 2017
4 Answers
Answer This Question
A: The dimensions of the product are 23-1/8 in. x 18-3/4 in.
by|May 5, 2023
A: Front to back 18 3/4"
Side to side 23 1/2"
by|Jun 5, 2019
2 found this answer helpful
A: If you scroll down to the product overview section on the right hand side is a link to all the product dimensions.
by|May 5, 2023
A: Edge-to-edge dimensions: 23-1/8 in. x 18-3/4 in. Whole to drop into can be 2 inches less all sides but the front side will have to be notched for the overflow hump . All I had to do after reviving a 47 year old sink was slightly bevel te vanity’s edge and it fit right in
Hope this helps
Rf
by|May 5, 2023
Q:I am trying to find the specs size for the cutout opening as I am trying to place this in an exis...
by|Sep 22, 2017
1 Answer
Answer This Question
A: The approximate cut out dimensions are 20-11/16" X 16-1/8".
by|May 4, 2023
Q:My vanity opening is 17 3/8 front to back and 21 inches left to right. would this sink fit. The outside detentions left to right is 22 1/2.
Would this sink fit?
by|May 18, 2017
2 Answers
Answer This Question
A: No, this unit will not fit.
by|May 4, 2023
A: We would not recommend.
by|May 4, 2023
Q:will this sink fit a preexisting opening of 18.25" x 20.25"
by|May 7, 2017
1 Answer
Answer This Question
A: No, it will not fit. The sink will be too large to fit these dimensions.