1-3/4 in. 9-Gauge Galvanized Staples for M18 FUEL Utility Fencing Stapler (960 Per Box)

These MILWAUKEE® 9 Gauge Galvanized Staples are intended for use in attaching wire fencing to wood fence posts, as well as securing copper grounding wire to utility poles. These staples are zinc-aluminum coated hot dipped galvanized to ensure corrosion resistance. The Milwaukee Gauge Galvanized Staples have barbed and coated divergent staple legs for increased holding power in materials. The diamond crown design allows for use with larger wire sizes and small plastic moldings. These staples come in in 3 lengths: 1 1/2", 1 3/4", 2" but I have only used the 2'' so far. The barbed coating helps to stay secured as well as the adhesive coating. There are 960 staples in the box.They worked well so far in everything I shot. I also used these on my 1'' X 4'' cedar fencing to secure the sort of dowel ends into the holes in the posts and they worked well and sunk right in deep.

The staples are holding up great for me. I have a small hole near the bottom of my shed and I needed to cover it temporarily. I was able to use these staples with my 19ga steel wire and so far it is holding up well. It has not rained since I placed the wire onto the bottom of my shed so I cannot comment on how well it holds up to water and the weather. With the strips, the dryfire mode in the Stapler kicked in with about 5 staples left, so I had to replace the strip with a new one.

This package of 960 nine (9) gauge 1.5 inch length Milwaukee staples will cover a lot of stapling duties and hold up very well over time! Each clip contains 20 staples so you will not have to reload your stapler that often. Being 9 gauge, these staples are very strong. Additionally, they are galvanized to reduce the chances of rusting over time. I used these to attach wire to wooden fencing and I expect these will last quite a long time! I highly recommend this staple package due to the large quantity in the package and overall high quality of the staples.

These are Milwaukee's 9 guage galvanized staples, designed and manufactured to work with their M18 Fuel Utility Fencing Stapler. They're available in 1-1/2, 1-3/4 and 2". Use them for your fencing needs and ground wire fastening to utility poles. Using these and the M18 Fuel Utility Fencing Stapler they'll sink into the hardest posts and poles. They come neatly packaged and can be quickly loaded and ready for service. And that diamond crown design allows room for larger cable or small plastic molding. Yeah, they're more expensive, but so is time and labor costs. This is so much easier and faster.

This is the superman of staplers. The MILWAUKEE M18 FUEL utility Fencing Stapler delivers unmatched performance in a completely battery-powered solution. By leveraging MILWAUKEE Nitrogen Air Spring technology, POWERSTATE Brushless motor, and REDLINK Intelligence, this stapler delivers the power to seat staples into the toughest utility pole and fence post materials. The Milwaukee M18 FUEL Utility Fencing Stapler provides users a 6X increase in productivity and a reduction in peak muscle effort compared to manual staple installation. The Milwaukee cordless stapler is designed for compatibility with MILWAUKEE 9 Gauge Galvanized Staples. Available in three sizes: 1 ½", 1 ¾", 2". When paired with MILWAUKEE M18 REDLITHIUM CP3.0 Battery pack, this stapler gives users the ability to sink up to 600 staples per charge no gas cartridge required. The M18 FUEL Utility Fencing Stapler joins the M18 System of over 200 solutions and is compatible with all M18 REDLITHIUM batteries. If you need to add steel to any project this will do the job. Amazing!

Well designed staples will hold every fence in place for a very long time. 9 gauge is a decent size and the galvanized finish will keep them looking good and corrosion free for just as long. These 1-1/2 inch long staples go into a fence post all the way when used with the Milwaukee M18 Utility Fencing Stapler on the deepest setting. That can be wound back to leave a larger gap for heavier fencing materials.

These Milwaukee heavy duty 9-gauge staples are only compatible with the Milwaukee M18 Utility Fencing Stapler, and they work very well. They are zinc-aluminum galvanized, collated with paper tape, and the legs are barbed and adhesive coated. I was surprised by the weight of the box when I lifted it - the box of 960 staples weighed 18.6 pounds. They are strong enough to be hammered into wood individually without bending if needed. They are available in 1.5", 1.75", and 2". I chose the 1.5" and the 1.75" staples for rewiring the pasture fence and garden enclosure. I like the diamond crown will secure wires or anything else that I staple without crushing them.

These Milwaukee heavy duty 9-gauge staples are only compatible with the Milwaukee M18 Utility Fencing Stapler, and they work very well. They are zinc-aluminum galvanized, collated with paper tape, and the legs are barbed and adhesive coated. I was surprised by the weight, the box of 960 staples weighed 16.5 pounds. They are strong enough to be hammered into wood individually without bending if needed. They are available in 1.5", 1.75", and 2". I chose the 1.5" and the 1.75" staples for rewiring the pasture fence and garden enclosure. I like the diamond crown will secure wires or anything else that I staple without crushing them.

These staples are very heavy duty and are specially made for the Milwaukee Tools M18 Utility Fencing Stapler Nailer. These are the largest of three sizes that are available. You get 960 in a box holding 48 sticks of 20. Two sticks can be added to the stapler at a time. Do not expect to pull these out once you have shot them into something. Each leg has a small barb - I assume put there to resist being pulled out. These staples are galvanized so they are unlikely to rust outdoors. I was able to drive them into oak without a problem. The stapler allows depth adjustment ranging from ‘all the way in’ to ‘leaving a ring protruding. The tips are painted red and they have paper tape down each side. I did not have any issues with them jamming. They are easy to add to the stapler and use. Note the box is heavy! Made in China

The Milwaukee 1-3/4 in. 9-Gauge Galvanized Staples for M18 FUEL Utility Fencing Stapler only works in the Milwaukee M18 Fuel Utility Fencing Stapler, no other brands. These staples are industrial grade, meaning they are very heavy duty but not for electrical house wiring. They are originally intended for attaching chain link fence, farm fence, or any other non-electrical fence to wooden fence posts. They can also be used to secure large ground wire (e.g.: 2 gauge) to utility poles. The staples are taped together in groups of 20 staples per sleeve so they can be easily loaded into the Milwaukee fencing stapler. The box of staples contain 48 sleeves for total of 960 staples per box making it a very heavy box. The staples measure 1 3/4 inches long from the top to the tip, 3/4 inch outside width, and 3/8 inch inside width between the prongs. The 9 gauge staples are galvanized steel with a diamond crown design having barbed legs and adhesive coating for increased holding in the wood. These staples have excellent holding power. I’m using them for a permanent installation of 8’ chain link fence around a camp facility to 4x4 wooden posts. Work great. Made in China.