Customer Reviews for Fasade 18.25 in. x 24.25 in. Antique Bronze Traditional Style # 1 PVC Decorative Backsplash Panel

Very easy to put up and looks very nice up.

Easy to install. Just measure, cut and glue. Loctite worked really well. Sticks almost immediately.

We had a microwave above our stove forever and it was cramped and dark. My husband decided to fix that for me (otherwise it was a big kitchen remodel). I'd seen this product in a utility room makeover and thought it would work and it did. Better than expected. It was easy to install and looks fabulous! The picture doesn't do it justice, but I'm thrilled with the results and this product.

My bar mirror cracked and I wanted to replace it with something that I would never have to worry about. Found this product and decided to try it out since it matched my tin ceiling. I am super happy how it turned out! I was a bit skeptical at first due to it being vinyl but you can’t even tell once it’s installed. It was easy to cut and install. I do think it was a bit over priced but the end result made it worth it for me.

Gorgeous backsplash! Looks just like metal but won't rust. Cut with scissors and install with glue. Perfect in my Victorian so kitchen.

Excellent product. Easy to install

I fell in love with this backsplash when I was looking through selections. I finally purchased it, weary that it might be too much for my little kitchen. My boyfriend helped me install. It was tricky in certain corners, but we made it work. I absolutely love the way it turned out! It added so much life to my kitchen. I replaced the faucet as well so it can match a little better. Might purchase new handles for the cabinets as well to really bring everything together.

Looks really nice, and easy to clean.

This turned out beautifully! I used it over my old tin backsplash which I could never keep clean and shiny enough. Very happy with the project!

I am very pleased with the color and pattern. It was easy to match the pattern style to create the backsplash. The durability of the installation was excellent.

We have used fascade faux tin in three kitchens now. Twice the crosshatch silver and once the Bermuda Bronze. Love the look, and it has really brightened up a dark and dated space. Here are a couple of before and afters of the kitchen we just finished. Of course new cabinets, light fixtures, and countertops helped.

All I can say is measure, measure and measure again. Tin snips or box type cutter recommended. It turned out beautiful in our kitchen. We even have two 45 degree angles that I was worried about but it worked out fine.

Great product! Went up so easy and made a huge difference in the area. Very easy to clean product!

Easy to use and looks great.

Very satisfactory and easy to work with.

I am happy with how this project turned out! It totally changed the vibe of our kitchen. Here are a few things I learned that may help others: - I watched the videos on the fasade site for tips - I went over existing glass mosaic tile which we didn’t love, I did clean and lightly sand it - I used a yard stick and a fine sharpie to mark my straight lines, rubbing alcohol removes any excess marker - After trying several tools to cut, I ended up using my cooking shears (you do need a box cutter for the outlet holes) - Apparently nothing in our house is actually plumb, I was surprised how much trimming I had to do to each piece even after measuring, this definitely added to installation time - The window sill took the longest because of the curves, I made a template out of freezer paper then traced on cardboard and tweaked till it was right before tracing on the tile itself - I used the fasade tape, it was easy, went very fast and seems very adhesive, but found it wasn’t super forgiving, you have to have the alignment pretty close to right before getting too close to where you want it - just take your time. I used more than they recommended, the 3 horizontal pieces plus several small pieces on the sides (I used 2 1/2 rolls for the entire project) - I didn’t use the trim or corner pieces, I thought it looked fine without - The seams are visible, but don’t catch your eye (see pic) All in I spent about $200 and 12-14 hours on it, not too bad for a backsplash make over!

This product came out really nicely. Pretty easy to install and looks great. Little fins leave for my taste but easy to work with. Would recommend to anyone.

Love the look and easy to trim but you will need some good sheers.

i purchased a new oven and wanted a backsplash to protect the wall behind it. i looked at various types of materials but decided on fasade - it gave me the look of metal i wanted, but the ease of cleaning and durability of vinyl. my space was pretty tight, and wasnt exactly even. and due to size, i needed to cut 2 sheets into 4 pieces and put them together with trim to fit the space. but since sides, top werent totally straight, i decided to hold the pieces together with painters tape as i made the adjustments. then i adhered all the parts together with Beacon Quick Grip. when done, not only were the seams nearly invisible, but i had one piece instead of several to adhere to the wall. if you are installing in a smaller space and you need to piece - id suggest you tape your pieces together with blue painters tape - back or front - to insure you have the exact fit you want instead of adhering each piece to the wall separately.

Love the product...perfect compliment to my old mill house

Easy application looks elegant

Looks great, easy to cut and install. I used construction adhesive and a utility knife.

Looks great. Easy to work with.

Love the look! Elegant!

Would this product work for us? We had a double oven when our laminate was installed in 2002. We just replaced all of appliances and now have over the oven microwave and new range. There is a gap where the contractor did not put the laminate (see photo).

The backsplash was installed in the kitchen below and above the wall cabinets. It was installed using the recommended glue instead of tape. It was easy to install and surprisingly easy to cut for outlets.

Easy to put up! Looks great.

So pretty and worked great as a stove backsplash. Edging was a little hard to get right.

Just used this. I am a senior lady, not the healthiest. Here is what I learned. Use a good pair of kitchen shears to cut, use a straight edge to mark.(I used my quilting mat and quilters edge. ) Use adhesive caulk, not the tape. It gives you the ability to slide around the panel into position. Caulk guns are fun! To mark for outlets, make paper patterns, I used sheets of wax paper. Fool proof! Measure, measure, measure, no walls are straight and true, neither are cabinets. 20" at one end can be 21 1/2 at the other. Unbelievable upgrade, so far easy to wipe clean. I bought a traditional crosshatch design . My kitchen is very busy, lots of baking and from scratch cooking, and this fills the need.

This stuff is not the easiest to work with but the results are soooo worth it! I bought the matte white. I absolutely love it. My new kitchen is so gorgeous now. Some tips... buy a pair of tin snips if you are going to be cutting very much of it. I had blisters before I finished. We tried tin snips right before we finished and I couldn't believe what a difference that made. Cut like butter. (I had been using scissors). Many of the reviews I read said they had trouble getting it to stay up. We just used whatever the stuff is you use to put up ceramic tile. Worked like a charm. I highly recommend this product.