Customer Reviews for Lyons Industries Style SB Drop-In Acrylic 33x19x8.25 in. 3-Hole Single Bowl Kitchen Sink in White

Let me start off by saying that we are seniors on a fixed income who own a new construction manufactured home on our own land. Now having said that, I've been wanting to replace the stainless steel double bowl sink that came with our home because the bowls are just too darn small to fit anything but dishes in. If you have a frying pan, you can't set it in to soak because it won't fit. Anyway, Home Depot finally offered a sink in the proper dimensions needed for a manufactured home refit and it was delivered and installed by me today, as was the faucet, also purchased at Home Depot. Finally, I can wash and rinse pots and pans without that stupid divider getting in the way. Thank you again Home Depot for carrying this sink and at a reasonable price too.

The sink was exactly what I needed. In other reviews some said the sink was a little bigger than their existing hole if they were replacing an old sink. I had to drill my hole a little larger. Other than that I love it.

Used in an older mobile home and the sink fit and is excellent quality. No complaints whatsoever.

Faucet mounting area could be more supported. In my opinion it not strong enough to support large necked faucets..

Rating provided by a verified purchaser

Purchased this sink because it was available in the odd size we needed, 33"X19". Looks nice and the quality of the sink is great with the exception of the edge that meets the counter. It could have been finished straighter as the edge shows, forcing us to use colored silicone. The hold down system is a bit odd and does not hold as well as I had expected. There lots of precautions like no hot liquids, no scouring pads etc.. For the price, it would be easier to replace it if something happened. Overall, satisfied.

This sink was the only available option in the apparently rare size. I really had nothing to compare it with. As it turned out, the transition was painless and perfect...the bright-white, acrylic, single sink just fit the space left by an old double, stainless steel one. And the innovative, snap-in clips eliminated the usually tedious task of tightening a lot of bolts while on your back beneath the unit. I guess the ultimate test will be the longevity of the sparkling surface. Ric Benson

I was cautious when purchasing because it looks very shiney in the pictures but it's not as bad as it looks. My only downfall about it is that a ring of water remains around the drain but other than that it's great.

I'm really happy with my new sink. I had a double acrylic and hated it. It was nasty after 11 years. I didn't really know how to take care of it and was too rough with it. I will be careful with the this one to keep it like new. No hot pans or boiling liquids and no Brillo pads. The 33x19 size was perfect and very easy to install. I love the large open sink area. I used a single brushed nickel faucet with plate and its tight and looks beautiful. Acrylic is much quieter than stainless. Its easy to keep clean. I like everything about it!

I needed a sink that was 33x19 and this was the only one I could find. Lowes also had it (by ordering it) but it was $20.00 more. I wasn't real excited about putting in an acrylic sink but after I installed it, it looks and works very good. Installation was easy. I would recommend this item.

Needed a New Sink for a few years now. Could not find a single sink style to fit the cut out in the counter. I have a Mobile Home so dimensions of cut out was smaller than a normal house sink, I had no room to cut out larger. I came across this sink, dimensions were perfect! I ordered the sink, hoping it would fit well & be durable. Fit perfect! Easy to install, purchased clear chalk at hardware store and that was it! Looked Great! It was Thanksgiving, had 23lb turkey to thaw, filled sink with turkey & water. That was ALOT of weight I figured to really test this sink. Sink held up perfectly. I love it and the price was SO AFFORDABLE! You'll love this one too!

I was replacing the original sink, a two bowl stainless steel. The clips on the sink I ordered were useless, since the opening was larger then the new sink. I had about a 1/4 of an inch on each side, but it was enough to seat the sink. As a precaution I caulked the under side of the sink as well. Other that that, the quality of the sink was very good for the price.

The sink was very nice and looked very sharp. It was such a great price too.

I consider the product is good... nice termination... looks great... the mounting claps are a really smart solution to make the installation pretty easy BUT they work ONLY if the hole is the exact / expected size. In my case I am replacing the original sink, which is installed using the typical claws with screws, so the hole was already cut and it is much bigger, so the claps in the new sink are far away from the edges. Claps are fixed (glued, part of the construction), so they is no way to make any adjustment possible to make them fit. I have been checking for another sink which can fit in the existing hole but that gets me to the typical two-bowl sink which I don't like, but so far I have not had any good luck, so for that reason I am still looking for a solution before returning the product; trying to create beneath the cabinet a new wood supporting structure in order to provide the required size to make the sink steady. SO my advice: IF YOU ARE REPLACING AN EXISTING SINK, CHECK BEFORE IF THE HOLE IS THE RIGHT ONE (or at least smaller so you can cut it properly). last comment: the provider didn't ship a box with the cutting diagram/frame as shown in the video, which is also not helping me have a clear vision of how far I am from the right hole, and help me create a wood support.