Customer Reviews for M-D Building Products 36 in. x 36 in. Union Jack Aluminum in Brass

It was exactly what I was looking for.

Super easy to cut to size.

Nice product. Very sturdy and easy to cut with tin snips. Looks great over the air intake

Used this to cover my radiator style heater. Very Easy to work with.

I am redoing our kitchen cabinets. I am replacing the wooden panels in the doors with metal ones. This product was exactly what I was looking for. The 3x3 foot size was a big plus.

This is a great product but slightly difficult to attach. We used it as the backing for our kitchen cupboard doors. We were unable to staple through the material so had to go through the open areas. They look great though!

I used it to block outdoor vents from rodents. Cut to size was easy and bending and putting in place

Great product good quality

Worked as expected! Cuts nicely! Used it in a cover made to cover some old fashion radiators.

Exactly what I was looking for. Easy to cut with tin snips.

It's great and easy to install.

Worked great as an ornamental baseboard radiator cover with some wood. Very happy with the result.

It was a little dented when I received it. I tried to even it out but I wasn't successful. Despite all of that, I was able to use it for my project, it took paint well and I think the finished product turned out pretty good.

Great product that can be used in a lot of different ways to give a project a finished look. I used these on the back of open shelves and love the way they turned out. The aluminum is a good thickness and relatively easy to cut with wire snips. I used a pneumatic stapler to attach these to the back of wood shelves and it was an easy installation.

Easy to work with. Nice looking.

A 40%-50% cost savings versus the exact same in-store metal, but you get what you pay for. The first order was blemished with a big rolling machine dent down the center of it that I had to straighten out. The second order was severely dented during shipping, as though somebody had bent it into a corner of the truck, and sheet metal will keep its shape. I was painting the metal, so I could straighten it back out without concern for light reflections on the metal exaggerating the dents, but do not order this if you need good to excellent condition. You can straighten the metal, but you'll never get the dents and folds completely out.

I used this for a new vent cover and to cover up the half-painted/unpainted finials (the inside where you can't get to it without taking the screen of) on my new screen door. Worked very well for both.

When I got home I realized that one is bent. And once I installed them on my project I realized that the border around the pattern was not the same on each piece. In addition, the price sticker on one of them did not come off cleanly, it left a smudge. They were expensive and should have been in better shape. I did not have time to drive to Home Depot and return or exchange them, otherwise I would have done it.

Exactly the finishing touch I was looking for. Easy to work with. With what I have left over I may add it to a couple kitchen cabinet doors.

A great find to keep the retro feel to my kitchen remodel. used to replace similar screen under the sink and had enough left to embellish the back wall of the display cabinet over the fridge.

The gauge is a bit thin but is working for my needs. Cuts very easy. My only bad comment was home depot delivered the mesh damaged and rather then dealing with returning it, I was able to make due out of what little I needed.

Yes it was a good product Ipainted it black and made two speaker grills , they worked great and was less then eleven bucks !!!

Packages came in tact and metal sheets were in good shape. I did wipe them down with alcohol before I primed them and painted them.

Quality Product. I would recommend it. Sturdy, but easy to work with. Takes paint well if needed. Found nothing to dislike. It exceeded my expectations.

I used this to back a spice rack to make sure the spices didn't tumble out the back. I was able to use a standard tin snips to cut. The edges were a bit rough but not too bad. I used #5 aluminum staples to attach the aluminum sheet to the wood in the spice rack. There was a slight bump on the corner when I received the sheet, but I didn't use that corner. It's a kind of buffed out finish which I prefer to the super shiny type of aluminum look.

Painted it white and installed as a screen. Framed.

I used this grill work to make a jewelry hanger by cutting it to size and putting it in an open wood frame.

Used it as inlay for the front of a bar. Looks great and adds to the character. Wish it came in custom sizes but it was easy to cut two pieces to make it work.

I am in the process of converting a 10' x 12' Tuff Shed wooden storage building into a workshop. I have wired it for power and internet, insulated it, sheet rocked it and trimmed the door, windows and skylight. That left the two vents on either side of the building. I decided I wanted something a little nicer than the standard vent cover. I was cruising the Home Depot website and spotted this perforated aluminum. That gave me the idea to use it to make two custom vent covers. I picked up some 1.5" hobby strip (alder wood) from my local Home Depot, but they did not have the aluminum in stock. Ordered it online and it arrived within a week. Easy to cut with tin snips and it worked out great, framed by the alder wood strips. A shot of Rustoleum Hammer tone paint is all I needed, although I believe it's available in gold tone. Very happy with Home Depot's service and the product worked out great.

One of two main air returns was located in the bottom of our cabinets with a medium-sized vent at the end. It worked, but the air drew so much better with the cabinet doors open. But that was ugly. So we cut shapes into the doors & backed it with the cut metal sheet. It was easy to cut to the correct size and staple to the inside of the door. Now it works well & looks pretty!