Customer Reviews for Homewerks Worldwide 2-Handle 1-Spray Tub and Shower Faucet in Chrome (Valve Included)

HOMEWERKS WORLDWIDE 2-HANDLE 1-SPRAY TUB AND SHOWER FAUCET IN CHROME (VALVE INCLUDED). This product is made of a quality brass it must be installed from the inter wall area. I had to remove the water heater that is located in closet area behind the shower. It was a difficult installation but it came out to be a beautiful install. I love the ease of how it connected without any leaks after replacing the water heater since there were no outer control valves.

We chose the Homewerks 2-handle, 1-spray tub and shower faucet in chrome for our guest bathroom remodel. Not only is the price amazing, but the product comes with everything included that we could possibly need. The chrome is very easy to clean and all of the parts are accounted for. The instructions are very easy to read and we can't wait for the paint to dry so we can install our new tub and shower faucet.

Not too bad for a mostly plastic product........................................................... This is an unbiased review that is unaffected by the fact that I received this product for free. As proof of impartiality, just click on my nickname and see the average of the ratings I have given over 300 reviews to date. This faucet and control is as you might expect. Only the valve assembly is metal, the rest is all plastic. At least it won't rust but take care with the assembly or it may break. But in use, it does work ok. Nothing fancy here, just your basic two-valve setup. This replaced an all-metal one from many years ago that was having some wear issues. It is nice to have the valves tight again with no leaks. Speaking of leaks, there is a small roll of Teflon sealing tape included. No special tools are required for installation. Do not use any abrasives on this item except for occasional soft scrub type products or you will quickly wear off the "chrome finish". In my photo of the parts, I forgot to show the brass plug that is included for installations that do not fit to a tub spout.

The quality of this 2-handle shower faucet kit is good. This is a fairly basic tub and shower trim kit that I would consider builder grade or contractor grade as it is light-weight and the parts you see and feel are made entirely of plastic, including the escutcheon plate for the shower arm and handle flanges, although the valve is made of metal. The shower head is fixed with no sprayer adjustment. The polished chrome finish resists fingerprints and hard water spots, and the clear acrylic handles operate smoothly and easily. A valve is included and installs easily, as valves go, but this is a basic valve and does not have an anti-scald built into the handles to prevent extreme changes in water temperature, so it may not be ideal for young children and the elderly. Also, a tub spout is not included, which is odd for a trim kit. I personally would prefer to have the tub spout included rather than the valve. Installation instructions are bilingual and well-written, with an illustration provided for each step in the assembly process. The faucet is backed by a lifetime limed warranty that covers defects in material in workmanship for life, and 5 years on the finish. Of note is that the warranty covers only the original purchaser and is not transferable. If you are trying to renovate your shower on budget, this two handle shower faucet kit is what you want.

This is a very good item for an economy style 2-handle Tub & Shower unit. It comes complete with all the main parts other that the internal piping in the walls. It even comes with a small roll of Teflon tape.The main valve portion is made out of metal (brass) with some internal plastic. The stems & handles are plastic & the sleeve covering the stems seems to be metallic(chrome colored). The round escutcheons for the stem sleeves are chrome colored plastic.The shower arm, arm escutcheon & the shower head are all plastic. The shower head front & the nozzles are made of a rubberized material (which lets one easily clean after a shower by just rubbing their fingers over them). The shower arm even though it is plastic has a nice feature of two slightly flattened sides to allow for easier installation. The tub spout is mainly metal & it is threaded near the tip for 1/2" pipe thread ( so it either needs a correct size nipple from the inner wall elbow or if there is just plain copper pipe - then a male threaded adapter would need to be added to the copper pipe (preferably soldered on in order to thread the spout without it turning). I am not a fan of plastic parts due to scratching or cracking but these look like they are made okay.

This is a basic builder grade tub shower faucet in chrome finish. The box arrived a little mashed because it was shipped in a mailer envelope. Everything inside appeared to unharmed. Includes: Homewerks Worldwide 2-Handle 1-Spray Tub and Shower Faucet with valve Included. Perfect for cost affordable home improvement. 2.5 gallons per minute flow rate.

This is a nice set economic class of Shower and Tub set at afforable price for those not wishing to spend too costly on their bathing. Major valve body is made with solid brass to ensure its works properly and lasting. Rest of the part, Shower Head, Handle Knob, Valve Plate Cover are made by plastice but they are finished with very fine and glass like chrome work. Either replace your old worn out tub and shower unit or newly install a new one which is quite attractive on the price and material. Installation mainly is the brass valve body has to install with your exisitng water pipe outlet, there you may need to hire a Plumber to install for you or you're a DIY person will get no problem on it.

I am no plumber so this was a little over my head. I had a need to replace some of the plumbing and the like for our master bath. The overall process was not terribly difficult once I figured out what I was doing. It was nice that it came with instructions. I did appreciate the fact that the everything came as a pre-welded unit, that was very helpful. I was somewhat, but not entirely disappointed with the quality of the plastic handles. They were not as heavy as I would have liked. That made me feel like the quality of the item was lessened. Perhaps I just did not have a good frame of reference, it is just how I felt when handling it.

Taking it back to store. Online description advertised 2.5 GPM, when it came, it’s only 1.8 GPM. Taking it to the store .

Mainly got just for the valve body, used everything except the head (used one with more flow) A lot of cheap plastic but it does what it needs to do, When you’re installing it, think ahead measure twice, cut once!

I ordered the Homewerks Worldwide 2 handle & 1 spray shower faucet because of the name Homewerks Worldwide and also because I'm installing a modular shower. It arrived very fast and all parts inclusive. I like the round simple faucet design which makes it easy to turn on/off with soapy hands. I specifically like the bright chrome finish. The quality is very good. Easy to install and it'll work out as planned and I like it.