Customer Reviews for Fasade 18.25 in. x 24.25 in. Galvanized Steel Waves PVC Decorative Tile Backsplash

Loved the look when installed. Put it over mosiac glass tile and it worked. Changed the whole look and brighten.

Looks awesome up! My only dislike is the lack of instructions and how to install it! It took messing with it to realize what we thought were base holders where actually sleeves that hide the seems when putting them together

Hands down one of the most unique and beautiful transformations in my home. Used as an entire accent wall and I love it and my installer... both Brilliant!

Love it. Exceeded my expectations. I am a kitchen designer by profession and Will be using this for future jobs. They also do ceiling tiles, crown, and whole wall panels.

Where do I begin? Let me start by saying that the product is great, the quality seems very good and the transformation it gave our kitchen is amazing. The panels look beautiful. They gave our kitchen a more modern look. It helped to that we changed our sink, faucet, and counter tops as well. What I did not enjoy so much was the installation. This is to no fault of the panels themselves, it is just that I had my work cut out for me with trying to cut around the panels to fit as precisely as I could around my kitchens window sill trim. At $20 each panel, I did not want to make any mistakes. I totally just winged it cutting the panel little by little until it fit as good as it could around the window sill trim. It was a painstaking process as the panels are not all that easy to cut. There were some small quarter inch to half inch gaps between the panel and the trim but it is not all that noticeable due to the fact that I bought a paint sample that closely matched the color of my panels to paint around the window trim, power outlets, wall corners, and base of the cabinets so try to hide any possibly gaps. And believe me, there will be some gaps once you are done cutting. I highly recommend you use sheers instead of regular scissors to cut the panels. When using your utility knife to cut the power outlet openings, pull the panel up and towards to a bit when cutting as it seems to help cut through the panel a little easier. I got better at cutting the panels as I went along. Also recommend using the corner trims for the corners of your kitchen walls and make sure to use plenty of adhesive.

The material was easy to cut for a close fit in the corners. The overlap area created an almost invisible seam. The border pieces that covered the edges were also very easy to cut and arrange to created perfect corners. I would definitely use this product in future finishing work that I may have an opportunity to do in the future.

Despite the cost of this product, it equals the looks and elegance of glass tile when creating backsplashes. Because of the wavy feature, cutting with a sharp utility knife was not an option. I chose a large pair of snips used in installing vinyl siding to simply cut to size. When it came to making the holes for outlets, I used a Multi Tool reciprocating saw with a fine-tooth blade. I also chose to use clear silicone to affix the panels because I have used the adhesive suggested and found silicone allows more forgiveness when moving the panels in position with a cleaner clean-up residue within the seams. Starting in larger, common spaces over stoves and sinks are a plus, but can pose a challenge because these panels need to overlap. By using silicone, this too allows more freedom and slower drying time.

I purchased the "tiles" at my local HD store. Instead of using them as a backsplash, I am installing them in my stairway landing wall as an accent wall. Due to the cost and the size of the wall I am buying a few at a time and installing as I go. Can't wait to see the full wall finished. Easy to cut and install. The adhesive tape sticks for a few days but will start to lift. I am using loctite all purpose adhesive to install and no problems with the tiles lifting.

I used multiple pieces of this to face my home bar. Product looks great when properly installed. Planning your seam locations and orientation are key. I found that the only way I could cut this due to the "wavy" shape was with a saw & finished the exges with a piece of sandpaper and a block to produce a quality edge finish. Tried to use the specified tape for installation and it all fell off a couple days later despite proper surface preparation. Reapplied with the adhesive caulking and it works perfect. Happy with the finished results. A bit costly but I factored that into the build up front so I was aware what I was going to spend ... less the tape failure. The tape DID stick VERY WELL to the plastic but not to other surfaces other than plastic. Would have preferred H.D. stock larger pieces to avoid seams.

Ad described. Great look.

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Installation was a breeze and I loved the look it gave my kitchen and was often complimented on it. Within 1 year black spots started to appear (like the brushed nickel came off and it was black beneath). Not sure why this happened on 4 of the 7 panels as I cleaned them regularly as recommended. They look so bad now that I need to decide whether to replace the 4 bad panels or switch to something entirely different. Sad and disappointed.

Super easy to work with. Easy to cut and easy to clean. I absolutely love it! It shipped quickly and wow the shine is exactly what I was hoping for.

Lovely! Used these panels to make a faux metal backsplash in both my kitchen and laundry room

Rating provided by a verified purchaser

Like the look

Gorgeous product! A little pricey but very pretty.

Rating provided by a verified purchaser

I applied the fasade between the back splash and bottom of the cupboards and they almost look like waterfalls from a distance. They really pop out and showcase the kitchen

Easy to cut and install

Everyone that has seen our back splash thought it was beautiful.My wife thinks it is great. The only negative with this type of back splash is cutting it to fit. with the "waves" in the design it was hard to cut a straight line. Roger

The fasade fit perfectly for both kitchens. Thank you for your product!

It was to expensive. Bring down the cost. $20.00 dollars per sheet was a lot. Difficult to cut in pieces. Small area to cover. I loved the design. It caught my eye immediately

It was so easy and fun