Customer Reviews for BOEN 36 in. x 150 ft. Self Adhesive FiFlex Mesh Joint Tape

I used this product to help mount pennies for a penny backsplash. Easy to cut and right price for quantity.

Works great for it's intended purpose. Very difficult to unroll leading to undesirable tears. Adhesion to surface exceeded my expectations. Aside from being difficult to understand roll a definite 5star product.

Rolls were hard to unravel, and caused a lot of rips

Very difficult to work with. Couldn’t unroll without tearing. We managed to work around the issues and hope that it holds up the way we felt forced to put it up; not the position we had intended.

Did exactly what I needed it for. Only complaint I have is it stuck together so good in the roll that it actually would tear apart trying to unroll it! I don’t know the solution to that because you don’t want to remove any sticky from the product.

Do not buy - Impossible to get off the roll - have to anchor roll and tug like mad.

The glue on the inside of the mesh was too strong, so pulling the sheet out was extremely difficult and often the mesh would tear, making it very difficult to use. I ended up not using it at all.

Great product except for it would rip every now & than. Even though I was being careful when unraveling it.

Perfect size for my project!

Rating provided by a verified purchaser

Worked great for a cracked concrete wall.

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Is is still as good as I remember sticks excellent all surfaces

Very strong and suitable for deteriorating plaster...I used it on plaster over structural terra cotta and no problems after 2 years. I used three skim coats of all purpose joint compound with light sanding between coats. The tack is good and stays in place prior to skim coats.,

I used it for my first coat of a sanded, acrylic stucco that I applied over a rough substrate. I think it would be good for reinforcing a surface to be coated with dry wall joint compound. For my application I had some minor problems with the mesh tearing since my stucco had to be troweled firmly to maintain a thin layer.

Works well, but it is tough to get off the roll. You really need a second person to help unroll a sheet on a flat horizontal surface to get it off without tearing it.

Great product for tracing rug hooking patterns!

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Rating provided by a verified purchaser

This was exactly what I needed. I had real plaster walls that had delaminated. I first was going to dry wall over them, but decided to try the webbing to stabilize the grainy surface under the plaster and then mud over it. Wow. The mesh stuck to the grainy surface (dusted first) well, then I applied a skim coat of mud to stabilize. Once dry, I added a couple more layers. Looks like a pro did it. Perfect.

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Absolutely!

Does not unroll easily and when you pull it It rips. I returned the first roll thinking it was damaged but the second roll was no better had to litterly lay it out like wallpaper before putting it on the wall. I have a 100+ year old house and have used 4 rolls prior and never had this problem