Customer Reviews for Everbilt Silver 1-Bike Wall Mounted Garage Bike Rack

Rating provided by a verified purchaser

Product is very well built and affordable..I would recommend it 100%..

I mounted this hanger so my MTB rear wheel was resting on the floor, would never hang a bike by one wheel because it could bend the rim out of round over time. And I needed to use a 5/32 drill bit (instead of recomended 1/8” bit) into yellow pine, even then the last 1/4” I needed to use a large bull nose Phillips screw drver and all my body weight to screw the screw in all the way. Very secure hold on my MTB, and don’t have to lift the bike off the ground to mount it in place.

Suits my purpose and is secure

Thick strong material. Using it for not what it was intended for though

Works great for hanging in my basement. Easy to put up. I think they do themselves a disservice by marketing it as a 30 lb. load limit. I have an older model marketed by Racor and that one has a 50 lb. limit. Truth is any engineer is going to put in a limit that is about 30% of what it can actually take so it's more like 150 lbs. Just look at the screws on the thing and you'll know that. I put mine up and hung off it and I'm 160 lbs. so my hybrid bikes that weigh 25 lbs. are not coming down anytime soon.

Quality: The quality of this hanger is OK. The metal seems thick enough to do the job however the rubber protective piece to keep your wheel from getting scratched is garbage. I read reviews about this but figured I would try it anyways. After putting my bike up just to test it, then taking the bike back down, the rubber piece already got cut and a small scratch on my very expensive wheel. After that, I used an old bike tube and cut a strip off, wrapped it around, electrical taped it, then zip tied both ends. Nice and thick and very durable now. I did this to the other 3 of them before I even installed them. Strength: They seem quite strong. My full suspension bike is right around 30lbs, the max of this hanger and it seems to be holding it fine. I do notice they triangle arm bends outwards slightly, partially due to the weight of the bike, but also due to the thickness of the tires. Design: I dont personally like the design. Most bikes out now days have a wider tire than what this is designed for. My road bike fits perfectly. The other 3 mountain bikes, even the ones with 2.2" tires, do not fit very well and cause the triangle arm to flex outwards. Time will tell if they hold up to that stress. Price: Cant beat the price. Even if they dont work out, it was worth the try for $4 each.

I used two of these to hang two adult road bikes. The hooks were easy to install into a stud with a drill. It looks like these will hold in place for ages, there is no sign of strain on the wall, hooks, or bikes. It takes a little awkward lifting to attach the front bike tire to these hooks, but then the rest of the weight of the bike is pressed against the wall vertically and the bikes are securely off the floor and out of the way.

Although well built, the size is too small to fit modern mtb bike tires. Will only fit 2.1 “ bike tires or smaller. In addition the recommended pre-drill size is too small and results in stripping the screw when drilled into the stud as recommended. Would not recommend to a friend.

This is an excellent tool. I have use these even in creative ways. Very happy with this product.

Hung on one wheel. Works like a charm.

Easy installing and sturdy

Installed quickly onto stud and working well with my large mountain bike.

Installed mine in the basement on the concrete wall with tapcon screws will hold my 250# weight

Very sturdy, works well. Great value for the price.

I tried other bike hanging hooks for my mountain bike but they are all too tight for larger tires. This one works perfectly for large tires and road bikes!

This is a good hanger if you have a low ceiling. The screws are long enough to have a good solid mount.

Everbilt 3-in-1 Wall Mount Bike Hanger works great. Very easy to install and holds my mans 26" inch bike with no issues.

It really doesn’t do a great job of holding the bike up. If you barely touch it, the tire is in danger of slipping out of the bracket. I used a bungee to make it more secure.

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Works as designed. Hung the bike so it rests on the back tire. Perfect for small spaces.

These are spot on for hanging bikes, bike tires, etc. There is a slight issue with fat tire bikes but that was expected.

Rating provided by a verified purchaser

Easy the install and it is easy to hang my bike on. It took only a matter of minutes and my bikes were hung.