Customer Reviews for Columbia Forest Products 3/4 in. x 2 ft. x 4 ft. PureBond Mahogany Plywood Project Panel (Free Custom Cut Available)

The mahogany plywood I ordered came in undamaged and was a good quality. I will be buying more of this plywood for future projects

I don't make a practice of writing reviews, but I thought Columbia Forest Products deserved kudos for this product! I could not source mahogany veneer plywood locally, so was both surprised and grateful to find this on HD's site. I could not be happier with the quality and value. While one side is the finish side, I sometimes had to look carefully at both before ripping! The finish side grain is very nice, I saved the nicest grain patterns for door and drawer fronts. The 10, 3/4" sheets I ordered arrived in perfect condition, well packaged and well protected on all sides (I was actually able to use one of the 1/2" sheets used as packaging as a drawer bottom!). I finished the material with a custom stain and semi-gloss polyurethane, intended to replicate rosewood. The plywood perfectly matched the color of the hardwood trim when stained. As my cabinets were 21" deep, the 2' x 8' sheets worked well for me. I made the cabinets in four parts, stacking two per side for a total cabinet height of 14'.

I ordered this for staircase/shelving unit for my tiny house. I had them custom cut to the sizes I needed. It arrived nicely packaged and the delivery speed was super fast!! They were very professional and contacted me to let me know when to expect delivery. The quality of the wood is amazing. It was so beautiful, I almost didn't want to put the stain I'd picked out on it! I will definitely be ordering from them again for my next project.

The appearance was much better than I expected. Only had one "void" in the lamination and since I had to cut to size, it was easily bypassed. Packaging was very good and only one small "ding" on one corner, which was cut off anyway.

This plywood has a nice uniform look to it. Grain goes the length of the 4 side'. The other side gives a look of boards butted up to each other. Easy to cut with a table saw or hand held power saw. The plywood takes a stain nicely. Plenty of strength in this plywood with just the 5 layers and the two veneer layers. I haven't seen any gaps in the edges of the plywood layers on this one.

This Mahogany plywood is a very good looking piece of wood, Has good grains on the finished side of the piece. Awesome to use on any project you may have. Once it is stained it would bring out the grains even more. The finished veneer could be thicker. There is not that much room for sanding. I am not sure if this is common. This ships very well. All 4 corners were in tip top shape and very sharp still

My first impression from the web listing was that this panel would work nicely for the bottom panel of a blanket chest that I am building. I took a chance and ordered it; the price was right and there is nowhere to get quality mahogany plywood anywhere near me. The packaging was done very well and the panel was protected nicely in foam. The panel was not completely flat, it had a slight bow, but nothing drastic. Upon inspection, one side of the panel looked ok, but the other had several spots where the veneer had been sanded through to the next layer by the machines that processed the panel (see photos). Since this was for the bottom panel of my project, I only needed one good side, so I kept the panel and decided to use it. When running my hand across the panel, I could feel slight undulations on the face. After cutting the panel to size, I could see why. There were many voids in the panel the had been filled with what looked like biscuits. These filler pieces were wedged in and pushed the outer layers further out making waves in the panel (see images). I'm guessing this is why the veneer was sanded through. The real pain came when trying to set the panel in the groove around the chest case. I had cut the groove to 23/32" around and tested with the panel prior to discovering the wedges in the voids. The panel fit just fine with the test. Once cut and the poor areas exposed to the edge, the panel was over 3/4" where those wedges were located. This made it a real challenge to install as it was not a consistent thickness. I guess you get what you pay for, but I was hoping for something a little better. Unfortunately, this was the only option in my area.

I purchased five panels of this mahagony in order to rebuild a laminate computer desk and printer stand. I was a little worried about the quality since I had no contol over the selection, but when they arrived, I was relieved since (1) they were packaged very securely; and (2) each piece was beautiful! Both sides were sanded and took the stain very nicely and evenly. I won't hesitate to purchase this wood or similar for future projects.

Beautiful grain for plywood.

Rating provided by a verified purchaser

Quality product but could be better packed with bubble wrap. Some minor scraping to wood surface was placed loose in box

Very good solid product. I thought both sides would be the same, but they were not

No flaws in face veneer. Packed well with all edges indented and useable.

I was hoping for more substantial panel that was void free. The mohogany veneer seems awfully thin too. It will work for the project, but in the future I will probably shop at a local specialty hardwood supplier for a better product.

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Mahogany veneers, poplar (?) cores, very nicely done. Cuts were perfect.

Rating provided by a verified purchaser

Rating provided by a verified purchaser

it's a very good product. Cuts very precise . Delivery fast. Thanks

It was PERFECT. Exactly as I had requested. I was very impressed.

Made it into a beautiful bathroom countertop. Cut nice and stained well

This was a great product and great service. I love it! It is perfect and I love the customization options!

I bought two pieces of Columbia Forest Products 3/4 in. x 2 ft. x 8 ft. PureBond Mahogany Plywood Project Panel and they come not flat.

Nice plywood. Delivered with no defects.

Very good quality overall. The mahogany veneer was very good looking and the pieces were virtually free of nicks or other defects. The edges were very square and clean. I will definitely consider reordering when needed.

Used this beautiful wood product to make a work desk. A few coats of Polyurethane with light sanding between coats made for a beautiful piece of furniture.

The mahogany panels arrived in excellent condition. The cuts were perfect. I plan to order again!!