Customer Reviews for BEHR 1 gal. #MS-75 Blue Gray Sky Satin Interior/Exterior Masonry, Stucco and Brick Paint

Used to paint brick around fireplace. Surface and grout joints were rough and porous. Took 3 coats but was not fault of product. Paint was thick enough , had no runs and held on to brush and roller well.

The bluest gray masonry paint spread evenly throughout my sidewalk. It is a thick, shiny and beautiful appearance. Couldn’t ask for a better paint and color.

Up to standards painted a block wall used up 10 gallons of paint. So far good but looks good gave some spots 3 coats should last at least 60 years . Paint was expensive

Little expensive but easy to apply and color change depending of light with a particular tonality.

I purchased this paint to redo our church ramp.Color match machine was dead on and the finished product is great

Very Good paint for brick……………………………………………………………..

Our house looks amazing! Painted off white brick Bakery Box white and it just looks so clean and crisp. Great coverage.

I just finished building a concrete block pier for my telescope and I wanted a good seal to keep moisture from penetrating the blocks so I chose the Behr masonry paint in white which will help keep the pier from absorbing too much heat on a sunny day. I think this is going to work very well.

we picked this paint to give new life to a tired old fire place. thick enough to cover great. use a rough surface roller and a good brush... not the cheapest and not the best ( Purdy, Wooster Pro ) because you will be throwing it away when your done.

Great Product

Army green was not Green at all. It was gray

Great paint, our Fireplace looks wonderful

Great paint

Wonderful results!

This is my 2nd time buying this paint when wet it looks pink when dry its a pretty cranberry color. I would buy again this is a very pretty color.

Purchased this from my local home depot, was directed to purchase it by a store associate as I am trying to paint my fireplace white and wanted something durable. Got home and cracked it open. Appears to be tan... Either my can is totally mislabeled or this is not a true white and the advertising of the product needs to be corrected. Absolutely misleading and frustrating. Puts me behind schedule on my project and I have to go back to the store and find a different product, will not be using this one.

I used this to paint my basement walls, which are standard concrete blocks. This room is used as a combination of things: home office, guest room, gaming room (for my video games), movie-watching, etc. I wanted to block out as much light glare/reflection as possible, especially for movie-watching, so I decided on black with a satin finish. I am absolutely impressed with how easily this paint applies - it's smooth, dries evenly, and has very little actual odour. While this paint claims to be one-coat-coverage, I dismissed that claim and had no expectation of it living up to that promise, being that I was painting black over white, which is near-impossible to achieve a solid black in only one application. To its credit, this paint only took two applications to achieve the desired coverage. I did make sure I had my dehumidifier running to keep the room's relative humidity at or below 50%, the ambient temperature was ~72 degrees Fahrenheit, and I used a heavy-nap roller to apply the paint to ensure I got in all the cracks and crevices of the blocks and mortar. It also bears mentioning that not only did I paint the cinder block walls with this paint, but I have some walls and the ceiling that are actually drywall - I anticipated this causing application problems, but to my surprise, it went on just as well as it did the masonry. Bonus! If I find myself in a position to need more paint that can be applied to masonry, stucco or brick, I will not hesitate for a fraction of a second to purchase this particular product again!

Great coverage.

I was using paint for fireplace. I first used Behring primer. This pint was not a bright white like primer. Re of cream/yellow. Will have to purchase another paint.

AROUND TWO YEARS AGO I PAINTED OUR WHOLE HOUSE WITH THIS PAINT. AND I READY LIKE THIS PAINT.I NEEDED SOME PAINT FOR RE TOUCH UP JOB SO I ORDER A CAN AND AFTER IT DRY YOU COULDN;T TELL WHERE I FIX THE BRICK. THE COLOR WAS THE SAME. HERE IS A PICTURE OF OUR HOUSE AFTER I PAINTED IT.

I bought this paint to go with the flooring I put in my sun room. I painted the brick wall in the room and it matched perfectly! I am very happy with the color. I also bought the flooring from home depot (lifelock Catalina gray) and installed it a few weeks ago.

Great paint for the price. Basement floor looks awesome. I used this on a property I was getting ready to sell and will be using it on my own home as well!

So i went with a warm gray color and im glad i did my wife wanted grey and I wanted beige color so we met half way this color seem to be perfect for us. Paint goes on fairly easily although we did prime first i rolled the primer and first coat but will be spraying the remaining areas.you will need a second coat to ensure an even sheen a third for me counting the primer but I am going over old semi painted stucco

I bought this paint because it has the features I was looking for: - "Self-priming" - "Long lasting" - "20 year guaranteed" - "Exterior" I mean, these qualities are eye-catching for all to read; very nicely printed on the can I may add. In my mind I thought, if it can paint "Masonry, stucco & brick", painting my garage doors would be a breeze, right? Wrong, IT WAS NOT. For my project, I'm 100% certain this paint is NOT self-priming. And yes, I did read the label; I did clean and prepare the surface; and I did check weather conditions (temperature, humidity, rain, wind, etc.). I'm attaching a photo of how my garage doors looked after the first coat. As you can see, the paint is not self-priming at all. The unevenness was not because of wet/dried spots. The photo was taken 3 hours after the first coat. All painted areas were dried to the touch. I wanted to return it but with the City Directive to Stay Home (COVID-19), I was stuck with this paint. I thought to myself, I got the time. So, I let it dried for 24 hours and re-applied a second coat. Coverage was better but, no cigar here!. My garage doors still looked patchy with uneven paint coverage. Once again, I let it dried 24 hours. For the third coat, I decided to paint-brush instead. Finally, I was able top get the coverage and look I wanted. I had the time for this project but never did I anticipate using it to paint my garage doors three (3) times.

Just put this on, original paint lasted about 15yrs. Great 1-coat coverage using brushes, I will plan to use an airless next time!

It went on smooth and covered well. I don't know about durability since I applied it only a week ago. Also, it is on a fountain; so we'll see.

Great paint! Made our 104 year old house look new.

I had this paint tinted light gray, and purchased it with a five gallon tub of the same in white. I painted my ugly concrete patio bright (two coats) and then used one coat of the gray with a stencil on top of the white (see pic). The paint is high quality, so far no bubbling or flaking (3 weeks and lots of 90 degree weather later) even though it's on a concrete patio that gets lots of wear and tear.

I would recommend this product!it goes on well and it covers well, I didn’t need as much paint as I thought I would for this project good job BEHR

Great product, covered well. I used it 12 years ago and it had no signs of scaling or peeling. I just wanted it to give it a refreshed look. I used white on the parging and navajo white on the brick. Very satisfied!!