Customer Reviews for Everbilt 1-1/2 in. Satin Brass Non-Removable Pin Narrow Utility Hinge (2-Pack)

Perfect for a locker door! I turned a cubby hole into a locker with these, plus 11" x 11" of half-inch thick plywood and lock mechanism I had. These hinges fit well for both sizes of plywood, and the non-removable pin is what you want for security. It's not bullet-proof of course: a prybar would rip the whole thing out, but it's a nice deterrent to tampering. These hinges were low-cost, the screws were perfect for this installation, and everything aligned well.

Decent steel hinge, Satin brass is debatable they should have left it in the plating tank another hour.

Good product. Delivery long.

They were very adequate for my application. I didn't have any trouble with the screws like others have reported.

There is better out there. I understand these hinges are not going to be perfect, but these particular hinges just have way to much play in them. Makes the door or what ever you are using them for lined up. The screws that come with the hinges are made from a very soft metal. They strip and break easily so that another thing to watch out for. The thread on the screws is not very coarse. Which makes it fine for driving into hardwood, but these does not grab very well in very soft woods like pine. So if you are using these for something like pine or MDF. I would pick up some #6 screws with a coarser thread.