Q:Looking for information on how to take out the center drawers to install the plumbing. Can you help?
by|Nov 27, 2019
2 Answers
Answer This Question
A: Drawers are very easy to remove. Underneath each drawer are 2 release levers. You just pinch them toward the center of the drawer and it will slid off the tracks. Putting the drawers back in is just as easy. Just slide on the tracks until they click the release levers.
by|May 3, 2021
A: Please open one of the drawers and look under it. You will see metal glides on each side of the drawer box. There will be a screw at the front of each metal glide. Please unscrew this screw and the drawer will come out.
Please note: You would need to put each drawer back in its original placement once they are removed. Fail to do this will result in gaps and misaligned drawers
Thank you.
by|Jul 12, 2020
Q:can i order this without the top
by|Aug 12, 2019
1 Answer
Answer This Question
A: Yes you can. Please search for Sku #WCV171772DCDCXSXXM70
by|Aug 14, 2019
Q:Did you guys put baseboard behind this vanity or just put it flat against the wall?
by|Jun 27, 2019
1 Answer
Answer This Question
A: It is best to do flat against the wall
by|Jun 28, 2019
Q:What are the dimensions of the included hardware? I would like to replace them and need to know the measurements to look for! Thank you!
by|Jun 25, 2019
2 Answers
Answer This Question
A: For anyone looking to replace hardware- the measurements are 5in, 2.5in, and 3.75in. You will need 4x 5in pulls (drawers), 2x 2.5in pulls (small drawers), and 2x 3.75in pulls (cabinets).
by|Oct 26, 2021
1 found this answer helpful
A: Im sorry this information is not available. We recommend receiving the unit first before purchasing replacement handles.
by|Jul 17, 2019
Q:Is the marble top sealed, should we seal it and with what?
by|May 29, 2019
1 Answer
Answer This Question
A: All counter tops come pre-sealed however it is always best to re-seal before first use and every 3-5 months thereafter.
Thank you.
by|May 29, 2019
Q:What is the measurement from the floor to the the bottom of the square opening in the back for the plumbing? Also from the side of the cabinet to the side of he same opening? I want to make sure it will accommodate the existing plumbing in that squared in area.
by|May 10, 2019
1 Answer
Answer This Question
A: I can not access it to measure. It is installed and I’d have to pull out all the drawers to get an exact measurement. Each center drawer is cut out with a “u” shape in the center to accommodate the pipe. The back opening looks to start 14-17 “ off the ground, but could be cut away pretty easily. The piece is nice, soft close doors, drawers, but the side cabinets are very narrow and deep. You can only access what’s in the front. The drawers are pretty shallow as well and lose storage space to compensate for the pipe. They usually have a schematic on the website. I wish I had checked these dimensions more carefully. That said, it looks great.
by|May 11, 2019
1 found this answer helpful
Q:Does it come with faucets? I assume i need to buy 2? i haven't read anything that talks about faucets..
by|Feb 26, 2019
2 Answers
Answer This Question
A: No faucets, I purchased Moen 8” widespread bathroom faucets, contractor replaced plumbing to the wall....
by|Feb 28, 2019
A: Faucets are not included. Yes,you would need two faucets.
by|Feb 28, 2019
Q:If this vanity is placed between 2 walls (opening 72in) will the cabinets door have enough room to open properly?
by|Feb 20, 2019
1 Answer
Answer This Question
A: The unit will be very snug and might hit the wall. Please check with your contractor
by|Feb 21, 2019
Q:what is the with of the vanity
by|Feb 18, 2019
3 Answers
Answer This Question
A: This has 47" width.
by|Feb 20, 2019
A: The width of this item is 47 inches.
by|Feb 22, 2019
A: Vanity Dimensions
47"W x 22"D x 33-1/4"H
by|Feb 19, 2019
Q:What is the mesurement between the two sinks? (Flat surface between the two sinks)