Q:I have a velux fixed deck mounted window model FS306 measuring 30x 46 to be installed with a new shingles roof. Can you please advise if this is the right flashing system? If not, which one is it? Thanks
by|Feb 26, 2024
1 Answer
Answer This Question
A: If you are placing the FS 306 model skylight on your home, you will need the previous generation flashing kit called: EDL 308 0000A. This kit fits FS 302, 304, 306 & 308 models skylights with a shingle roof system.
by|Feb 27, 2024
Q:Are these 3 low e skylights approved by Miami-Dade County?
by|Feb 17, 2024
1 Answer
Answer This Question
A: In most cases, you will want to choose a curb mounted skylight with Impact Rated glass for those HVHZ areas. One thing to keep in mind: According to the state of Florida, both Miami-Dade and Broward Counties must also recognize products listed on the Florida Product Approval website. If it is stated that only Miami-Dade NOA listed product are to be used, they must explain their rationale, because Florida allows any product listed on the Florida Product Approval website to be “considered” for possible use anywhere in Florida. There is a caveat: Just because a product is listed on the Florida Product Approval website does not mean it meets the minimum performance requirements in that part of Florida or for the project. Meaning- the skylight or sun tunnel may be HVHZ approved and have a Cycle Pressure rating of +/-50 PSF, but the project spec might require a +/-60 Cycle Pressure rating or might require a stronger design pressure. As with all building products, please check with your local building code official for product acceptance.
by|Feb 21, 2024
Q:Is this flashing kit backwards compatible with velux fs112?
by|Feb 9, 2024
1 Answer
Answer This Question
A: Mike, that's a great question! Actually no, the C12 is made for the newer versions. For further discussion regarding your options you can reach VELUX direct at 800-888-3589.
by|Feb 13, 2024
Q:Does the flashing need to be replaced with a roof replacement? My skylights are 5 years old and the roof is asphalt shingles
by|Jan 31, 2024
1 Answer
Answer This Question
A: Excellent question! Yes anytime you replace your roof a skylight will need to be replaced or wrapped and re-flashed if fairly new.
by|Feb 1, 2024
Q:Do you need a curb for a flat roof installation?
by|Oct 3, 2023
1 Answer
Answer This Question
A: Flat roof applications require a curb and use the roofing material as the flashing. For more questions reach out to VELUX direct at 800-888-3589.
by|Oct 20, 2023
Q:What Flashing kit is needed for a discontinued Velux VS 106 0075D 76 Al10A circa 2004?
by|Sep 21, 2023
1 Answer
Answer This Question
A: The direct replacement for a VS 106 is a C06 sized product. The flashings for a 106 shingled application on at least a 3/12 pitch is an EDL 106 0000A. For further questions you can reach VELUX Support at 800-888-3589.
by|Sep 21, 2023
Q:What skylight flash kit do I need for a 30? by 30? skylight ? With the flash kits showed measurements would save time .
by|Sep 19, 2023
1 Answer
Answer This Question
A: All VELUX flashings are specific to the unit. A deck mounted unit size M02 30 9/16 x 30 1/2 uses the EDL M08 0000B for a shingled application. VELUX Customer Support can be reached direct at 800-888-3589.
by|Sep 20, 2023
Q:I bought the following flashing kits and skylights. How tall is the curb the skylights are mounted to on the roof?
VELUX 22-1/2 in. x 46-1/2 in. Venting Curb Mount Skylight
VELUX 2222, 2230, 2234 low profile flashiing Model #ECL 2246 0000C
by|Sep 19, 2023
2 Answers
Answer This Question
A: VELUX curb mounted skylights can be installed on either a 2x4 or 2x6 on edge curb. The ECL flashings will accommodate either size. Thanks for your question.
by|Sep 19, 2023
A: When using 2x4 lumber to build your curb, the venting curb mounted skylight overall height off of the roof deck is 8 1/4 inches.