#1 Home Improvement Retailer

Questions and Answers for VELCRO 4 in. x 2 in. Industrial Strength Strips in White (2-Pack)

Internet #202261922

Model #90200

Store SKU #846996

  • Designed for indoor and outdoor heavy duty use
  • Designed to adhere to most surfaces
  • Holds 50% more than typical sticky back fasteners

Questions & Answers

7Questions
caret
Q:Does a single strip hold 10lbs or only 5lbs?
by|Feb 11, 2023
1 Answer
Answer This Question

A:  Weight Rating 1 lbs per square inch up to 10 lbs

by|Feb 13, 2023
    caret
    Q:does the velcro stick to the wall?
    by|Nov 10, 2022
    1 Answer
    Answer This Question

    A:  This product will stick to smooth surfaces if your wall is smooth.

    by|Nov 10, 2022
      caret
      Q:Is this item designed to work on Polyethylene surfaces?
      by|Jan 9, 2021
      3 Answers
      Answer This Question

      A:  I reached out to Velcro about this item being used on Polypropylene and they recommended using their product number 91050. It can also be found at Home Depot. https://www.homedepot.com/p/VELCRO-Brand-3-ft-x-1-in-Ultra-Mate-Tape-91050/202261941?NCNI-5 I purchased a Rotomolded Kayak that is made of Polypropylene. I have a battery and electrical distribution hub that I want to mound to the inside of the Kayak and not have it move around while fishing. The scenario that I asked for feedback from Velcro was that I intended on using my Kayak in both fresh and salt water, plan on storing it in my garage where temperatures would range from 30F-120F, and the fastener would need to be resistant to a brief submergence in water, and this is what they recommended.

      by|Aug 9, 2023
        1 found this answer helpful

        A:  According to their website -Using VELCRO® Brand Adhesive for Plastics VELCRO® Brand Glue On Adhesive (style 90065) permanently bonds to a variety of porous and non-porous materials, including PVC, plastics, rubber, and leather.

        by|Apr 30, 2023

        A:  Using VELCRO® Brand Adhesive for Plastics VELCRO® Brand Glue On Adhesive (style 90065) permanently bonds to a variety of porous and non-porous materials, including PVC, plastics, rubber, and leather.

        by|Jan 9, 2021
        caret
        Q:Could this help make a thigh machine wrap around the thigh
        by|Oct 27, 2020
        1 Answer
        Answer This Question

        A:  We would need more detail on how you intend to use Velcro Brand Industrial Strength on a thigh machine. This product has adhesive.

        by|Oct 27, 2020
          caret
          Q:Is this product heat resistant?
          by|Jul 12, 2020
          2 Answers
          Answer This Question

          A:  Industrial Strength fasteners will stick to most smooth surfaces, powering through humidity and shifts in temperature in places where most fasteners fail.

          by|Jul 22, 2020

            A:  I found that 3m VHB double sided tape works. While it is not like velcro where it can be easily detached and reattached, the VHB tape worked for my application in the absence of a clear answer from velcro as to what maximum temperature the adhesive would remain attached to the surface.

            by|Jul 22, 2020
              caret
              Q:The photo looks colorless. Is that true?
              by|Jan 11, 2019
              5 Answers
              Answer This Question

              A:  The strips are white. Thank you

              by|Sep 22, 2022

                A:  it comes in black or white

                by|May 30, 2020

                  A:  it either comes in black or white

                  by|May 30, 2020

                    A:  No it’s white

                    by|Jan 9, 2021

                    A:  The strips are White

                    by|Jan 11, 2019
                      caret
                      Q:How easy is it to remove from painted wall?
                      by|Apr 26, 2017
                      3 Answers
                      Answer This Question

                      A:  I removed it with a paint scraper

                      by|May 30, 2020

                        A:  remove with a paint scraper

                        by|May 30, 2020

                          A:  Hello Please follow the steps below: 1.) Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun.) 2.) Peel off the tape (Hook or Loop) the adhesive will remain on the substrate. 3.) Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball. 4.) Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments). 5.) Stick the ball on the adhesive which is on your substrate and pull it off. 6.) Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time. 7.) If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners.

                          by|Oct 10, 2018
                            3 found this answer helpful

                            Frequently Bought Together

                            +
                            +
                            Price:
                            $3.14