#1 Home Improvement Retailer

Questions and Answers for Universal Hardware Commercial Stainless Steel Pull Plate with Cylinder Hole

Internet #203737736

Model #UH40011

Store SKU #310659

  • Designed to work directly with Universal Hardware Exit Device
  • Made of corrosion-resistant steel to ensure durable use
  • Meets ANSI standards for safe and smooth use on commercial doors

Questions & Answers

2Questions
caret
Q:How does this fasten to the door? from the inside or outside?
by|Sep 25, 2018
4 Answers
Answer This Question

A:  It is guaranteed to last the harshest outdoor conditions. It can also be used for an indoors installation, your choice.This unit installs from the opposing side of the handle on your door.

by|Aug 25, 2023
1 found this answer helpful

A:  This unit installs from the opposing side of the handle.

by|Aug 25, 2023
    1 found this answer helpful

    A:  This door pull would be on the outside of a door. This is a commercial/industrial door pull to complement a panic door device latching system, and is used with a UH40010 Rim Panic Bar. These are the doors you find in many public places where there is a bar at hip level that will open the door when pressed. You’ll remember these from any school, movie theater, or shopping mall to name a few.

    by|Sep 6, 2023
    1 found this answer helpful

    A:  This Steel Pull Handle is a perfect complement to a panic bar with a rim cylinder. Installation video and instruction can be found on our website www.universalhardware.com/product/details/UH40011.

    by|Aug 25, 2023
      caret
      Q:what it the diameter of the hole for the deadbolt?
      by|Apr 5, 2016
      3 Answers
      Answer This Question

      A:  Pre-cut slot for cylinder hole measures approximately 1 1/8" in diameter. Hope this helps.

      by|Sep 23, 2019

      A:  Bob-the diameter of the hole in the plate to accommodate the deadbolt is approximately 1-1/8". If you need any additional information regarding our UH40011, we can be reached at www.Hampton.Care.

      by|May 4, 2023

        A:  The hole is 1-1/8 inch in diameter and is not intended for a deadbolt. It is for a key cylinder only, and will not fit a standard 2-1/8 inch deadbolt. This is a commercial/industrial door pull to complement a panic door device latching system. These are the doors you find in many public places where there is a bar at hip level that will open the door when the bar is pressed. This is not intended to be used as a stand alone door pull.

        by|Sep 23, 2019