Questions and Answers for TrafficMaster Allure Ultra 7.5 in. x 47.6 in. 2-Strip Light Maple Luxury Vinyl Plank Flooring (19.8 sq. ft. / Case)

A:  Thank you for your question. There is really no way to have a smooth edge. You would have to use the matching bull nose that is offered through a company called Zamma or a rubber or laminate bull nose.

A:  Thank you for your recent inquiry with The Home Depot. This product is made in China. This item is an online exclusive and is not available in your local Home Depot store. It can be ordered online and shipped directly to your home, business, or local store. Unfortunately, this item is currently out of stock. This item is scheduled to return to stock in early February with limited inventory. Please continue to check our website for updates. For any other questions, please call us at HomeDepot.com Customer Service 800-430-3376.

A:  Hello gumby8 and thank you for your question. To replace a plank of Allure ULTRA, take a utility knife and cut the damaged plank out ONLY along the long side of the plank. Lift out the damaged plank. Take a spare plank and cut the tongue and groove ONLY from the long side of the replacement plank. Leave the tongue and groove on the short side of the plank. Fit the replacement plank into place and lock the two short ends into position. If you have any problems or questions, contact the Allure Customer Help Line at 1-866-843-8453. Remember to replace the plank flooring at the same temperature as it was installed (between 65-85oF). Additional maintenance information is found on page 8 of the Owner’s Manual: http://www.mydiygenius.com/images/stories/documents/manual-ultra-sp-english-usa.pdf. Best wishes on your project.

A:  Hi Cab1, unfortunately this flooring has to be installed in an environment where the temperature is above 55 degrees F and below 85 degrees F. Unfortunately the area you would like to install Allure will be to hot.

A:  I prefer not to describe a color because everyones perspective of that is not the same. you can view the colors in the store or purchase samples on line...I hope that helps.

A:  Yes, you can order a sample on Home Depots web site.

A:  Thank you for your question...yes, this is the perfect product for a bath floor. As long as the bathroom is not flooded with water it will perform great! You can run a bead of silicone around the perimeter of the tub if you would like just make sure it is latex.

A:  Thank you for your question...the product is not intended or warrantied for wall application but can certainly be glued if that is your choice. Yes, it is slip resistant to slightly moisture feet. If the floor is flooded with water, no it is not.