Questions and Answers for Toro 22 in. Drive Belt for RWD Toro WPM (2009 and Newer)

A:  Hi, there! Thanks for your question. No, this belt will not work for your unit. Yes, you will need belt #140-4041 for your unit #21465. Thanks!

A:  Hi, Matt! Thanks for your question. For unit 20383, you will need belt #110-1790. Thanks!

A:  No, you will need replacement belt part # 92-1043. To find or purchase parts, go to toro.com/parts. Enter your model number and select your serial range. Click on Parts. You can either search for the part that you are looking for, or click on the assembly drawing. For engine parts, refer to the engine manual included with your mower. Thank you.

A:  Toro 22 in. Drive Belt does fit well too small

A:  Jay, you should lift up the rear flap where the bag goes and get the model number and serial number. This will help you get the right belt .

A:  We will need your model number to determine the correct replacement belt. If you need assistance finding the model number, view https://www.toro.com/en/parts/findmodelserialplate. Thank you.

A:  Should work fine if it fits , I think there's only a couple of belts that are common for the Toro mower . One is about 33" long and the other is about 35" long . So if it fits and the mower works fine your ok .

A:  Both belts have the same profile, but the RWD belt is 32.98” long and the correct FWD belt is 32.06” long. You might be able to get it to work, but we would recommend you replace it with the correct belt (38990). Over time with belt stretch, you might run out of adjustment room on the cable. You can purchase the correct belt at https://www.homedepot.com/p/Toro-22-in-Drive-Belt-for-FWD-Toro-WPM-2009-and-Newer-38990/203651126. Thank you.

A:  To better answer your question, please contact the HD.com customer service department at 800-430-3376. Call any day between 6 a.m. and 2 p.m. EST, or call your local store. They can either answer your question or transfer you to your local store to answer your specific question. Thank you.

A:  Central Islip

A:  Yes

A:  Yes, this is the correct replacement belt for model 20381. Thank you.

A:  Thank you for your question. Yes, this replacement belt will fit model # 20334.

A:  Yes

A:  I also have the 190cc model 20334. Mine was made in April of 2013 and the belt has finally stretched so much that it is no longer self propelled as of today (May1, 2021). According to the Toro website this should be the right belt. My Home Depot says they have it in stock so I'm on my way to buy one and install it. If it's not you'll hear back from me tonight lol.

A:  Thank you for your question. You will need replacement belt part # 91-2258. Please contact Toro Customer Support for availability at 1-888-384-9939. Hours are Monday – Friday 8:00am-4:30pm CST.

A:  Yup, you need the "real" 115-4669, which is not this belt. I find the whole situation rather confusing, since the belt has that number on it, but it's nearly 2" too short. The right one in that case is labeled 22 in. Replacement Walk Mower V-Belt , and Model # 115-4669.

A:  To better assist you, please contact Toro Customer Support at 1-888-384-9939. Hours are Monday – Friday 8:00am-4:30pm CST. Thank you.