A: The CV2249.040 can be cut but the edges would have an unfinished edges. A better option would be to go to www.swanstone.com. Under the bathroom tab you can create a custom vanity page which can be taken to your local Home Depot for pricing and availability. Good luck with your project.
by|May 4, 2023
Q:Does anyone have trouble with leaking Delta drain or have a solution?
by|Jul 9, 2017
1 Answer
Answer This Question
A: Swan vanity tops are designed to national standards and should any standard drain. Check to make sure there are no cracks in the sink. If you followed the directions for installing the drain, is the sink sitting flat so the drain connects flat? Are the drain gaskets aligned correctly? It is difficult to diagnose this problem via the internet. If you take some pictures / video to your local Home Depot one of the associates may be able to help diagnose the problem.
by|May 4, 2023
Q:What size drain does it need?
by|Jun 5, 2017
1 Answer
Answer This Question
A: Thank you for considering Swan products. The CV2231-040 is designed for a 1-3/4" drain. Scroll down the Home Depot page to the Specification hyperlink and you will be able to see all of the measurements.
by|May 4, 2023
Q:If Tahiti white is a composite with two tones, is either of them gold or noticeably another color...
by|Apr 11, 2017
1 Answer
Answer This Question
A: Thank you for your interest in a Swan vanity top. Tahiti White is a tone-on-tone white color. The main color is a soft white with a brighter white fleck in the material. From a short distance, it all looks white until you get closer to the product. There aren't any other colors such as gold, yellow or gray in the material. We will be glad to send you a color chip sample to help make your final decision. You can reach out to our customer service department at 800-325-7008 and they will be happy to help.
by|May 4, 2023
Q:This item states that the sidesplash is sold separately. However, I don't see it on the website....
by|Apr 9, 2017
1 Answer
Answer This Question
A: Yes, Model #VT21-3SS-040 / Internet #202509013 is available for ordering online. This side splash is 21"W x 3"H x 3/8"D and is designed to fit the Contour vanity tops.
by|May 4, 2023
1 found this answer helpful
Q:Our ten-year-old swanstone sink is discolored. What product will remove the stain?
by|Apr 6, 2017
1 Answer
Answer This Question
A: Cleaning regularly with common household cleaners should keep your vanity top looking beautiful. Abrasive cleansers can even be used with nylon scouring pads or sponges. Mr. Clean Magic Eraser or other similar products are also acceptable. Mineral-stain removers can also be used. Do not use metal scouring pads as these will damage the surface of the vanity top. Many stains can be removed using a 50-50 mix of bleach and water and allowing to soak for 15 minutes. For rust or mineral stains, rust-removing products are acceptable. To add luster or to extend the time between cleanings, Weiman Granite Cleaner & Polish is recommended. Thank you for choosing Swan products.
by|May 4, 2023
1 found this answer helpful
Q:Is the Bisque color more of a white or is it more beige. I could not tell from the pictures.
by|Mar 9, 2017
1 Answer
Answer This Question
A: Sorry for the confusion. Bisque is a very light beige color. You can order a sample by calling Swan customer service 800-325-7008.
by|May 4, 2023
Q:actual top thickness? specs list says 1cm but must mean 1", & even that seems thin
by|Feb 28, 2017
1 Answer
Answer This Question
A: We apologize for the confusion on this product page. The thickness of this top is 1". Go to http://www.homedepot.com/catalog/pdfImages/0d/0dc2bf4b-5025-4a9c-9a6a-21df61070c9a.pdf and you will see a detailed design page which should answer your measurement questions. Swanstone material is extremely durable and that is why it is only 1" thick. Good luck with your project.
by|May 4, 2023
Q:Can you get a matching side splash?
by|Feb 25, 2017
2 Answers
Answer This Question
A: Thank you for your interest in Swan's Contour vanity top and matching side splash. Yes, we do have two options available: Model # VT21-3SS-040 or Model #VT22SS-040. Both side splashes can be special ordered through your local Home Depot store. The side splashes are manufactured from the same solid surface material as the vanity top. The difference between the two is that the VT21-3SS-040 is 3/8" thick and the VT22SS-040 is 3/4" thick. We hope this information will help you in your decision in choosing a new vanity top and side splash for your bathroom remodel. Thanks for considering Swan!
by|May 4, 2023
A: You I buy the matching side splash and what is the cost? And how do I order it?
by|Aug 30, 2019
Q:is this pre-drilled for faucets? If so, what spacing does it support? not sure how it can accep...