A: Yes, Suntuf panels can be used for a greenhouse
by|Apr 14, 2024
1 found this answer helpful
Q:How about showing a price
by|Feb 9, 2024
1 Answer
Answer This Question
A: Please reach out to Home Depot for pricing
by|Feb 12, 2024
Q:Do I predrill the holes on top?
by|Feb 4, 2024
1 Answer
Answer This Question
A: Hi, yes, he will want to pre-drill holes for the fasteners per the installation instructions panels should be fastened through the crown and not the valleys in a roofing application.
by|Apr 5, 2024
1 found this answer helpful
Q:How much is the overlap for each piece in inches
by|Jan 25, 2024
1 Answer
Answer This Question
A: A 26" wide panel will provide 24" of coverage when overlapped.
by|Jan 25, 2024
Q:IS IT WATERPROOF?
by|Jan 23, 2024
1 Answer
Answer This Question
A: Panels are weather resistant. Please review installation guide prior to installing
by|Jan 23, 2024
Q:I would like to know the snowload of this material.
by|Jan 18, 2024
1 Answer
Answer This Question
A: Hi, thank you for your question. The snow load of this material depends upon the framing of the structure you are covering. There is a snow load table on page 8 of the installation instructions for various support spacing. The installation instructions can be found in the product details section on homedepotm.com under additional resources.
by|Jan 18, 2024
Q:Can I use a stand up propane heater under the polycarbonate roof?
by|Dec 25, 2023
1 Answer
Answer This Question
A: Service temperature range is up to 212 degrees F. You would want to ensure the panels are far enough away from the heater and/or prolonged exposure to high heat
by|Jan 2, 2024
Q:I cant haul 12 ft sheets but need 9 ft sections anyway. Can you cut to order?
by|Dec 17, 2023
1 Answer
Answer This Question
A: The vendor does not, you would have to ask your local store if they offer this service.
by|Mar 6, 2024
Q:Can I use this as siding with a 10’ span
by|Dec 10, 2023
1 Answer
Answer This Question
A: No. Please review the installation instructions. There is a load support table provided.
by|Feb 9, 2024
1 found this answer helpful
Q:Can I cut it in half?
by|Dec 6, 2023
1 Answer
Answer This Question
A: Panels can be cut using snips or a circular saw using a reversed plywood blade