Questions and Answers for Suncast Claremont Cupola with Copper Roof-DISCONTINUED

A:  Jim: Yes, you cut the base to match the pitch of the roof. Instructions are very good for doing this. Good fishing in the Manistee? Sandy

A:  Because the bottom edge is not pre-cut, it must be cut to fit the pitch of the roof on which it is to be installed. Plan ahead on this to be sure you will be able to make the cut without severely weakening the cupola. An alternative is to build a box to fit the roof pitch, then mount the cupola on top of that. Be sure to add flashing to adequately shed water.

A:  Hard to say, but home delivery is certainly convenient.

A:  Hello Ken, Thank you for asking. We have 2 different programs BOPIS (Buy On line Pickup In Store) and BOSS (Buy Online Ship to Store). With BOPIS you are purchasing the stores physical inventory. Standard processing and shipping apply with BOSS. Shipping is free and most orders process within 3 business days. Please allow an additional 3-5 business days for Standard Ground Delivery in the U.S. For any other questions, please call us at HomeDepot.com Customer Service 800-430-3376.

A:  I would expect the weather-vane kit should have instructions for this. Personally, I would be concerned about messing up the copper roof. It comes fully wrapped to avoid getting finger prints on the copper during installation, with instructions to only remove the plastic wrap as the final step.

A:  The Suncast Claremont Cupola with Copper Roof Model LCC was not designed for a weathervane, Ken. We have no instructions for adding one. It would require modification to the cupola, negating any warranty. Thank you for your interest in Suncast products.

A:  The Suncast Claremont Cupola with Copper Roof is assembled as a unit with the roof attached. The base of the cupola is fastened to the roof of the shed with hardware that is supplied with the kit. Thank you for your interest in Suncast products.

A:  The top of the cupola is separate from the body, so attachments from the inside are easy and recommended. I added flashing which extended outward over the roof a few inches to be sure water is carried away, then used flashing/gutter adhesive from the inside to attach it to the roof. If putting on a roof exposed to high winds, I would consider adding "L" brackets inside.

A:  The Suncast Claremont Cupola with Copper Roof Model LCC is 22 inches wide by 22 inches long by 22 inches high. Thank you for your interest in Suncast products.

A:  About 22 inches square at the bottom.

A:  There is no hole in the top.

A:  The Suncast Claremont Cupola with Copper Roof Model LCC does not have a hole in the top for a weathervane. Thank you for your interest in Suncast products.