Questions and Answers for Steves & Sons 24 in. x 80 in. Reliant Series Full Lite White Primed Fiberglass Prehung Front Door

A:  No we do not. I sill extender can be used o get the extra 2 inches if you can't order door at your local Home Depot.

A:  This can only be order or bought at local Home Depot if your stores sells our doors in store or if we are on their ordering system. Please look at this Internet #314883684 the glass is not screwed in, it is actually built between the two slabs which gives you a better clean look, but you can paint frame all the way to the glass.

A:  It is generally not recommended to use a fiberglass door for a sauna room. This is because fiberglass can release harmful chemicals when exposed to constant high temperatures, which can be dangerous to your health when you are using the sauna. Instead, it is recommended to use a door made from a heat-resistant material, such as wood or tempered glass, that can withstand the high temperatures and humidity levels typically found in a sauna room. In addition to being safe, a properly designed sauna door will also help to keep heat and steam inside the sauna room, creating a more effective and enjoyable sauna experience.

A:  It is the jamb size. The 6LI has a 6-9/16 jamb, and the 4LI has a 4-9/16 jamb.

A:  FL 17901.12 : PSF +47,-47; inswing/outswing

A:  Our exterior doors can not be trimmed down, it will void warranty. Your local Home Depot can help you find the correct size there.

A:  It will be attached to glass when you receive the door. CPD# CRT-M-1-00906-00001 Frame/Sash Wood/Fiberglass U-factor .29 SHGC .17 VT .32

A:  Aluminum

A:  Hi Jim, Steves & Sons posted the wrong part number, the correct part number for the Adhesion Promoting Primer is 17061000 here is the link where you can buy it. Zabitat was founded in 2014 by ODL https://www.zabitat.com/u/odl-adhesion-promoter-12-oz-spray-can-17061000#yotpoQA

A:  Paint within 45 days of installation using only an exterior grade, light color acrylic latex paint. An exterior grade finish coat or sealer must be applied if stained. CAUTION - Painting this frame a dark color and/or installing behind a storm door can cause heat damage not covered by the warranty. 1. For increased paint adhesion use adhesion promoting primer made for use with polypropylene. Available from ODL in spray cans; use part number 17061000.2. Finish with an exterior grade acrylic latex paint. CAUTION - Apply paint in a well-ventilated area and follow all paint manufacturer’s cautions, warnings and instructions. Other acceptable primers available through national distributors can be used; look for plastic adhesion promoters.

A:  22 x 64