Questions and Answers for St. Paul Providence 21 in. W x 26 in. H x 8 in. D Over the Toilet Bathroom Storage Wall Cabinet in White

A:  It's up to you the installer. I placed mine in the vertical centerline of the mirror adjacent to it. It's shallow enough that you're not going to hit your head so it's really up to where it's easily accessible and that it looks right in proportion to the things around it. Hope that helps.

A:  There is not a set distance.

A:  Carlos, Thank you for your inquiry. We can confirm that there is not set distance recommended for the space between your toilet and the bottom of your cabinet. If you have any questions concerning installation, our best recommendation would be for you to consult with your local Home Depot Bath team for suggestions. Best Regards.

A:  Mike, Thank you for your inquiry. We can confirm that we do not manufacture the Providence 20 in. Over John cabinet with a “Shaker” style door. The closest option we have for you would be the Glacier Bay 20.5 in. Del Mar Over John cabinet in White. You may find the Del Mar Over John cabinet by visiting the Home Depot website and running a search for Model # DMOJ21COM-W / Internet # 203206310, you will be taken directly to the product page. Best Regards.

A:  It is wood on the back. About 1/4"

A:  My cabinet is mounted to the wall now, so I cannot really tell what the back is made of, although it is thin. However, across the back at the top is a thick extra board around 2 1/4 " wide to provide a good solid support surface for using screws to mount the cabinet to the wall. Using that, my cabinet seems very secure, since that board provided good flexibility to put screws directly into wood studs rather than flimsy plastic wall anchors.

A:  Janice, Thank you for your inquiry. We can confirm that the back of the St. Paul 20 in. Providence Over John cabinet is not made out of solid wood. The back of the Providence Over John cabinet is constructed out of a piece of engineered wood. Best Regards.

A:  The back of this cabinet is finished.

A:  The back is finished.

A:  Cbrunner, Thank you for your inquiry. We can confirm that there is a backboard and it is finished with the White stain on the interior of the cabinet and brown on the outside (the side that faces the wall) of the cabinet. Best Regards.

A:  The back of the cabinet is not finished.

A:  The one that I have not only has a back, but also has an extra board in back across the top to facilitate mounting on the wall in a sturdy and secure way. I am really pleased with this cabinet because it seems quite strong and well-built. It is a bit heavy, though, so mounting it may take 2 people. Make sure you mount into solid wood studs rather than trusting flimsy wallboard anchors that might pull out.

A:  Cm, Thank you for your inquiry. We can confirm that the availability of units in store does vary by region. In order to best find out whether or not the 20 in. Providence Over John is available for viewing in your area, we would suggest calling your local Home Depot store and asking if they carry Store SKU # 670809. Best Regards,

A:  Fifteen pounds plus

A:  Roughly 22 lbs. Thanks St. Paul

A:  Mine came with short and long screws. Go to HomeDepot and find an equivalent thread size and a screw that is long enough if the screws they sent you don't work. That stinks and I'm sorry that happened.

A:  Jeff, The cabinet I received had 2 sets of screws. The screws are 8/32 which you can get at HD.

A:  Thanks for your purchase of St. Paul Home Products sold exclusively through the Home Depot. You may have gotten screws the wrong screws. Please contact our customer service 1-800-235-7747. ONLY @ HOMEDEPOT.COM: Design Your Own Vanity (Select Top, Color and Design) Ships in 72 hrs. Direct to your home or to store**** http://www.stpaulhomeproducts.com/selections/desktop_index.html Design a Custom Top-43 different Colors: Stone Images- Solid Surface- Composite- Vessels- 8" Spread or 4" Spread pre-drilled faucet holes******** http://stpaul.homedepot.com/Vanity-Top-Customizer.html Thanks St. Paul Team

A:  There are additional screws that are longer tho do fit.

A:  no it is not stable enough

A:  Not really designed to sit on a counter top. It looks really good mounted on the wall above the toilet. The one that i chose is only 20 inches wide, 26 inches in height, and 7 1/2 inches deep, but it holds all of my essentials.

A:  Itsame, Thanks for your interest in St. Paul Home Products. This unit will sit on your counter top but because of its height and when loaded with supplies it is recommended that you secure it to the wall or top to stablize it. Thanks, St. Paul Team

A:  You could, but I would recommend hanging to prevent tipping over.

A:  I had no problem with this cabinet. Chose it because of dimensions.

A:  The issue was for a clasp that was received damaged. I contacted the manufacturer as it said in the instructions. The manufacturer customer support was non existent and also non cooperative. They wanted me to ship the part back to them and they would determine if it was their problem or the shipping company (UPS) problem. I went to my local Home Depot and found the replacement part cost $1.03. The customer service rep at Home Depot apologized, gave me the part and said don't call any manufacturer when you buy from Home Depot - let them handle the problem. I am very satisfied with Home Depot. The cabinet looks good and goes up easy. Just don't expect any support from the manufacturer unless you are fluent in Chinesse.

A:  Marie, thank you for your interest! I appreciate your concern. These issues have been resolved and you shouldn't have any quality issues.

A:  You have to use your own wall anchors and locate a 2 x 4 behind the wall to anchor the cabinet. It is to heavy to anchor in dry wall.

A:  The board at the top along the back provides a solid area for screws to mount the cabinet. Just make sure you screw into solid wood studs. This cabinet is sturdy but heavy, and I would not trust mounting it into flimsy wallboard anchors.

A:  Trixdesigns, If mounting this cabinet through dry wall to studs, 2" wood screws are recommended (not included). You install by drilling through the cleat, located at the top of the interior of the cabinet. The installation instructions can be found here: http://www.homedepot.com/catalog/pdfImages/6d/6df975f4-80a0-4834-b41c-829a9cab194c.pdf Please let us know if you have any other questions, and I apologize that the installation instructions were missing from your cabinet. Thank you! The St. Paul Team

A:  If you find one stud behind where the cabinet is going to be hung, (use a stud finder), use two longer wood or metal screws (2 1/2"-3") and mark one just below the inside of the cabinet top and one just above the cabinet bottom where the wood is thicker; inline with where the stud is. Make sure cabinet is level when marking holes. (note. leave enough room from the edge of the inside cab top and bottom for a drill to be used in final installation.) Determine the vertical distance and mark the holes on the wall where the stud is. Drill larger through holes in cabinet and a smaller pilot holes in the wall. Pre-sink the wood screws in the wall to the right depth and this will make the final sinking of the screws easier once the cab is in place. Sink screws while someone holds the cab in place. Use a drill to do this and it will be much easier. Two screws is all you need if they are both in the stud. If you can't find a stud you'll need to use drywall anchors and again, two screws should be enough.

A:  find at least one stud behind it and drill a hole top and bottom to mount for strenght. Use at least 2 1/2 inch screws. Other screws can be normal sheet rock mounts so you have a total of 4 screws holding it up. two people makes it easier but you can use something to prop it up before mounting.