#1 Home Improvement Retailer

Questions and Answers for SharkBite 1/2 in. Push-to-Connect Brass End Stop Fitting

Internet #202270531

Model #U514LFA

Store SKU #282608

  • Fastest way to cap PEX, copper, CPVC, PE-RT or HDPE Pipe
  • Requires no special tools to install on hot or cold water lines
  • Works on wet lines, rotatable after installation & removable

Questions & Answers

41Questions
caret
Q:Are these rated and marked as " LeadFree" ( LF/NL ) to meet NSF 61 standards?
by|Mar 17, 2024
1 Answer
Answer This Question

A:  Hi, Thank you for contacting SharkBite. The 3/4" Push-to-Connect Brass End Stop is a lead free product and it meets the ASSE 1061/NSF 61 standard. I've attached a link from the Home Depot website that states this. If you have any more questions you can call tech support at 877-700-4242. (https://www.homedepot.com/p/SharkBite-3-4-in-Push-to-Connect-Brass-End-Stop-Fitting-U518LFA/202270532) Kind regards,

by|Mar 19, 2024
    caret
    Q:Does this half inch OD pipe
    by|Mar 12, 2024
    1 Answer
    Answer This Question

    A:  Hi, The 3/4 in. Push-to-Connect Brass End Stop Fitting will only work on the following pipes. PEX (ASTM F876, CSA B137.5), Copper (ASTM B 88), CPVC (ASTM D 2846, CSA B137.6), PE-RT (ASTM F 2769), HDPE (SDR-9 ASTM D2737). If you have one of the listed pipes and it's a 1/2" OD. Then you could use a 3/8" end cap. The part number (U512LF). If you have any more questions you can call tech support at 877-700-4242. Kind regards,

    by|Mar 12, 2024
      caret
      Q:How do you remove the end cap? Can it be reused
      by|Jan 26, 2024
      1 Answer
      Answer This Question

      A:  Hello, The SharkBite Max 1/2 in. Push-to-Connect Brass End Stop Fitting can be removed. We make several removal tools. I've attached a link to the removal tools we offer. If you have any more questions you can call tech support at 877-700-4242. (https://www.sharkbite.com/us/en/brass-push-to-connect/tools/disconnect-clip) (https://www.sharkbite.com/us/en/brass-push-to-connect/tools/disconnect-tongs) (https://www.sharkbite.com/us/en/brass-push-to-connect/tools/pro-disconnect-tool) Kind regards,

      by|Jan 31, 2024
        caret
        Q:Is the other end of this threaded? It doesn't show the back end, only the push end. I nned female theads on the other end.
        by|Jan 23, 2024
        1 Answer
        Answer This Question

        A:  Hi, The SharkBite 3/4 in. Push-to-Connect Brass End Stop Fitting does not have threads on the other side of the fitting. The fitting is designed to cap a water line. If you have any more questions you can call our technical support at 877-700-4242. Kind regards,

        by|Jan 24, 2024
          caret
          Q:Will this cap PTFE tubing
          by|Dec 10, 2023
          1 Answer
          Answer This Question

          A:  Hi, The SharkBite 3/8 in. (1/2 in. O.D.) Push-to-Connect Brass End Stop will fit the following pipes. PEX (ASTM F876, CSA B137.5) Copper (ASTM B 88) CPVC (ASTM D 2846, CSA B137.6) PE-RT (ASTM F 2769) HDPE (SDR-9 ASTM D2737). If you have any more questions you can call tech support at 877-700-4242. Kind regards,

          by|Dec 13, 2023
            caret
            Q:With shark bite caps, tap off polybutylene water pipe
            by|Oct 12, 2023
            1 Answer
            Answer This Question

            A:  Hello, We do not have SharkBite End Caps compatible with polybutylene pipe. If you have any other questions or need further assistance please feel free to reach out to Tech support at 1(877)700-4242. Thank you.

            by|Oct 19, 2023
              caret
              Q:Are these sharkbite max or gen1?
              by|Sep 28, 2023
              1 Answer
              Answer This Question

              A:  Hi Cliff, Thank you for contacting SharkBite. The SharkBite 1 in. Push-to-Connect Brass End Stop is a Gen 1 end stop. If you have any more questions you can call tech support at 877-700-4242. Kind regards,

              by|Sep 28, 2023
                caret
                Q:Will this cap work for a boiler line 3/4? I?m not too good at soldering and the previous owners added a bunch of extra 3/4 that I want to cap off.
                by|Mar 24, 2023
                1 Answer
                Answer This Question

                A:  Hi, The SharkBite 3/4 in. Diameter Push-to-Connect Brass End Stop will connect to 3/4" hard drawn rigid copper pipe that has been tested to the (ASTM B88) standard. If you have any more questions you can call tech support at 877-700-4242. (Kind regards,)

                by|Jan 26, 2024
                  1 found this answer helpful