Questions and Answers for SharkBite 1/2 in. Push-to-Connect Brass 90-Degree Elbow Fitting

A:  Hi Jesus, The SharkBite Max 1/2 in. Brass 90-Degree Push-to-Connect Elbow Fitting can be connected to the following pipes. PEX (ASTM F876, CSA B137.5) Copper (ASTM B 88) CPVC (ASTM D 2846, CSA B137.6) PE-RT (ASTM F 2769) HDPE (SDR-9 ASTM D2737). If your shower valve has one of the following pipes connected to it then the SharkBite Max 1/2 in. Brass 90-Degree Push-to-Connect Elbow Fitting will work in your application. If you have any more questions you can call tech support at 877-700-4242. Kind regards,

A:  Hi, The SharkBite Max 1/2 in. Brass 90-Degree Push-to-Connect Elbow Fitting can be used behind walls. It meets the UPC code for installation without access panels. If you have any more questions you can call tech support at 877-700-4242. Kind regards,

A:  Hi, The SharkBite 1/2 in. Push-to-Connect Brass 90-Degree Elbow Fitting will connect hard drawn rigid copper pipe that has been tested to the (ASTM B88) standard to a PEX pipe that has been tested to the (ASTM F876) standard. You will find the ASTM standard information printed on the pipes. If you have any more questions you can call tech support at 877-700-4242. Kind regards,

A:  Hi, The SharkBite 1/2 in. Push-to-Connect Brass 90-Degree Elbow has an insertion depth of 15/16". We will need more information about your application in order to assist you. If you still need assistance you can call tech support at 877-700-4242. Kind regards,

A:  The pipe needs to be de-soldered or else the pipes will not be long enough also you will need to clean thr solder off the ends with Emory cloth too ensure a tite fit

A:  I don't think so.

A:  If you cut off the threaded part...

A:  Hi, The SharkBite 1/2 in. Push-to-Connect Brass 90-Degree Elbow will not connect to threads. We do make a product that has NPT threads that are male and female threads. I've attached a link to these products. If you have any more questions do not hesitate to contact us. (https://www.sharkbite.com/us/en/brass-push-to-connect/fittings/adapters/brass-push-female-adapter-elbow) (https://www.sharkbite.com/us/en/brass-push-to-connect/fittings/adapters/brass-push-male-adapter-elbow) (Kind regards,)

A:  HI, The SharkBite 3/4 in. Push-to-Connect Brass 90-Degree Elbow can be used in hydronic applications. The fitting has been tested up to 200 degrees Fahrenheit. If you will call tech support at 877-700-4242 we will be happy to help. (Kind regards,)

A:  Hi, The SharkBite 1/2 in. Push-to-Connect Brass 90-Degree Elbow will work with any PEX pipe that has been tested to the (ASTM F876) standard. You will find this information printed on the PEX pipe. If you have any more questions you can call tech support at 877-700-4242. (Kind regards,)

A:  why would you need this for pex

A:  I'm not a Plumber, but I used it for this. I ran cold and hot water lines to my basement with Pex lines and used Sharkbites.

A:  Hi, The pipe will go 1.13" or an 1 1/8" in to the SharkBite 3/4 in. Push-to-Connect Brass 90-Degree Elbow Fitting. If you have any more questions you can call tech support at 877-700-4242. (Kind regards,)