Q:I need deadbolts for the outside gate door. Will these be good for that?
by|Oct 2, 2023
1 Answer
Answer This Question
A: Unfortunately, the residential locksets are not suitable for use on exterior gates. If you have any other questions or require any further assistance, please call us at 888-805-9837 or email consumerschlage@allegion.com.
by|Oct 2, 2023
Q:Can I get these and knobs keyed alike all with the same single key?
by|Jul 15, 2023
1 Answer
Answer This Question
A: Yes, all residential Schlage locks can be keyed alike. If you have any other questions or require any further assistance, please call us at 888-805-9837 or email consumerschlage@allegion.com.
by|Jul 17, 2023
Q:Can I use this black deadbolt on the outside of the door and use a bright brass B62 deadbolt on the inside of the door? I would essentially be "interchanging" the deadbolts.
by|Jun 5, 2023
1 Answer
Answer This Question
A: Yes, if you have two of the same models in different finishes you can combine the opposite halves to create a split finish look. If you have any other questions or require any further assistance, please call us at 888-805-9837 or email consumerschlage@allegion.com.
by|Jun 6, 2023
Q:What keyway are the cylinders?
by|Feb 27, 2023
2 Answers
Answer This Question
A: Hello,
Our residential products have a 5pin C keyway cylinder. If you have any other questions or require any further assistance, please call us at 888-805-9837 or email consumerschlage@allegion.com.
by|Mar 2, 2023
A: Schlage - sc1
by|Mar 2, 2023
Q:Does this include two deadbolts with the same key?
by|Sep 16, 2022
2 Answers
Answer This Question
A: It's one deadbolt. Both sides are keyed, inside and outside. No lever on inside.
by|Mar 2, 2023
2 found this answer helpful
A: No, this is a single deadbolt with a cylinder on both sides. This deadbolt will include two keys. If you have any other questions or require any further assistance, please call us at 888-805-9837 or email consumerschlage@allegion.com.
by|Sep 16, 2022
Q:need smaller strike plate with rounded corners. can I order one in Matte Black? neither one that came with the lock work
by|Jul 8, 2022
1 Answer
Answer This Question
A: This is supposed to work. Strike Plates (Part 10-116): Supplied with a Round Strike only with Dimensions of 2-1/4" x 1-5/8". If this is too big, maybe you'll need to customize a hole using a blank filler strike plate.
by|Jul 9, 2022
Q:Will this lock fit a 1 & 9 /16 hole instead of the standard 2 1/8 inch. can the inside ring be taken off to make it work?
by|Oct 28, 2021
1 Answer
Answer This Question
A: Yes, the B62 has removable pick shields, allowing for installation of a cross-bore with a minimum diameter of 1-1/2". If you have any other questions or require any further assistance, please call us at 888-805-9837 or email consumerschlage@allegion.com.