Questions and Answers for STERLING Stinson Drop-In Vitreous China Bathroom Sink in White with Overflow Drain

A:  Hi Kelly, this is Sarah with Sterling Customer Service. I'm glad to address your question. Please call our Customer Service team at 1-800-4KOHLER so that we can learn how we can help. Thank you for choosing Sterling.

A:  Packing should have included a cutting pattern and dimensions. If not, can be accessed from Home Depot web site.

A:  Hi slynn, this is Sarah with Sterling Customer Service. I'm glad to answer your question. The lip is 7/16" thick. Thank you for choosing Sterling.

A:  Mine is roughly 1/2 in.

A:  The overflow drain holes are in the front.

A:  the overflow drain holes, we put in the front, like normal not the rear of the sink.

A:  The three Stinson sinks that I have all have the holes in the front (closest to me). If you order these, I suggest you look at them carefully to make sure they are uniform on the back and sites. We had to return at least two of our initial order because they were not uniform. I suggest also looking closely at the finish; two of the sinks are great, however, the third is horrible with small cracks in the enamel and the entire surface around the drain is eroded. There has not been any chemical used here; it looks like the sink is 20 years old.

A:  They are in the front. The pic is upside down on the website. Here is ours installed

A:  Hello Lane, my name is Kassi with Sterling. I'd be happy to answer your question. For sink 442007-0, the overflow holes are in the front when installed. Thank you for choosing Sterling.

A:  Hi, this is Laura with Sterling Plumbing. I am happy to assist you with your question. Please call our Customer Care Center at 1-800-456-4537 (M-F, 8am-5pm CST) and choose the Literature option to order a complimentary template for this sink; this is the only method of ensuring compatibility. Thank you for choosing Sterling.

A:  I think it depends on the shape of your current cutout. If it is rectangular, it may be too large to be covered completely by the lip of the sink. Note that the 14" fore/aft dimension is on the centerline. The front and rear edges are curved and so the sides measure only 13" in length.

A:  Hello, my name is Sarah with Kohler Co. I'm glad to answer your question. The water depth on this sink is 5". Thank you for choosing KOHLER.

A:  This sink is 7-1/8" deep.

A:  BL, my name is Jessica with Kohler Customer Service. I am happy to assist with your inquiry. 442007 measures 20" side to side and 14" front to back. The exact cutout is provided on the template 1084867-7 which is included with the sink and can be provided at our Literature department at 920-803-3985. Thank you for choosing Sterling Plumbing.

A:  they could possibly be reversed. when we set out sinks in with the overflow at the back (which is awkward) the sinks did not fit flush all the way around. When we put them in with the overflow at the front of the sink, they did fit quite a bit better as far as sitting flush with the counter top. the template could possibly be reversed.

A:  14"x20" Go to sinks page on web site and open "Specifications"; all will be reviled. Nice sink!!

A:  Hi, this is Laura with Sterling Plumbing. I am happy to assist you with your question. This sink is 20" L (left to right) and 14" W (front to back). The middle of the basin bows out slightly in the center; the included template is needed for the correct cut-out. Thank you for choosing Sterling.

A:  This product is 20" L (left to right) and 14" W (front to back). The middle of the basin bows out slightly in the center; the included template is needed for the correct cut-out.

A:  Hello, my name is Jay with Sterling Customer Service. I am happy to assist you with your sink question. The drain hole is 1-11/16”. Please work with your local Home Depot for pricing and availability on this product. Thank you for choosing Sterling Plumbing.