Q:I?m putting a vent above my pellet stove and a vent on upper floor. What do I need to connect the two vents, so as not to loose heat in between floors.
by|Nov 29, 2021
1 Answer
Answer This Question
A: A rectangular duct between the two floors will provide the needed air flow without loss.
The duct is in 3 foot section so you will need to cut to length with tin snips.
Then bend over the flange and screw it in place to the floor above.
Search for Internet #202907281, Model #SM-WS 12336 to purchase.
by|Nov 29, 2021
Q:Are these the actual measurements of the hole in the floor?
by|Jul 9, 2021
1 Answer
Answer This Question
A: The cut out would be 4-1/4 x 10-1/4.
This allows for the rim of the register boot.
This leaves a 4x10 opening for grille register.
by|Jul 12, 2021
Q:is this brown or tan
by|Nov 25, 2015
4 Answers
Answer This Question
A: It's darker than tan, maybe a light brown or tannish brown.
by|Jun 24, 2020
1 found this answer helpful
A: brown
by|May 6, 2023
A: Light Brown. At least all the vents we use are brown.