Questions and Answers for Rust-Oleum Stops Rust 12 oz. Hammered Bright Red Protective Spray Paint (6-Pack)

A:  Happy to help! Rust-Oleum Stops Rust Hammered Spray Paint can be used on range hoods as long as the surface does not reach temperatures above 200°F. The surface must also be free of any polish and be lightly sanded to create a surface profile to ensure full adhesion. Since this is an aerosol paint, you will want to ensure that you are applying in an area with proper ventilation and air circulation, such as outdoors or in an open garage. Surrounding areas should also be covered to protect them from any overspray. - Rust-Oleum Product Support 3

A:  Happy to help. Rust-Oleum Stops Rust Hammered Spray Paint cannot be applied to galvanized metal or to cold galvanizing spray paint. Oil based paints are not compatible with the zinc in galvanized metal (or cold galvanizing spray paint), it will not adhere and peel from the surface. Prime first with Rust-Oleum Stops Rust Universal Bonding Primer, this primer is formulated to prime difficult surfaces, including galvanized metal. https://www.homedepot.com/p/Rust-Oleum-Stops-Rust-12-oz-Universal-Bonding-Primer-Spray-6-Pack-285011/205926957 - Rust-Oleum Product Support 6

A:  Thank you for reaching out! Yes, our Rust-Oleum Stops Rust Hammered Copper Spray Paint may be applied to stainless steel. For the best adhesion and coverage, we recommend first priming the surface using our Rust-Oleum Stops Rust Clean Metal Primer Spray: https://www.homedepot.com/p/Rust-Oleum-Stops-Rust-12-oz-Flat-White-Clean-Metal-Primer-Spray-7780830/100143442 - Rust-Oleum Product Support 2

A:  Thanks for reaching out, Jon. Rust-Oleum Stops Rust Hammered Spray Paint can be applied to metal surfaces, including copper, that does not exceed 200°F. If the copper pipes exceed 200°F, we have no other coating we can recommend. - Rust-Oleum Product Support 6

A:  We appreciate your interest. While Rust-Oleum Stops Rust Hammered Spray Paint can be applied to metal surfaces, we do not recommend it for use on areas that will reach temperatures above 200°F. This type of exposure will cause the coating to blister and peel. - Rust-Oleum Product Support 3

A:  Thanks for reaching out, Terri. To achieve the best hammered finish using Rust-Oleum Stops Rust Hammered Spray Paint, be sure to shake the can vigorously for at least one minute once the mixing ball begins to rattle, and frequently during use. When applying, hold the can 10-16" from the surface and spray in a steady back and forth motion, slightly overlapping each stroke, keeping the can the same distance from the surface. Keep the can in motion while spraying. Apply 2 or more light coats a few minutes apart until the desired coverage has been achieved. More light coats will provide the best hammered finish. - Rust-Oleum Product Support 6

A:  Happy to help! Rust-Oleum Stops Rust Hammered Spray Paint can be used over bare and previously painted metal surfaces. Smooth, hard, or glossy surfaces should be lightly sanded prior to application to ensure full adhesion. A clear coat is not required, but can be used if wanting to change the sheen of the hammered paint. - Rust-Oleum Product Support 3

A:  Thanks for reaching out. Rust-Oleum Stops Rust Hammered Spray Paint can be applied to metal and wood surfaces, it cannot be applied to plastic. Rust-Oleum Universal Advanced Formula Hammered Spray Paint can be applied to plastic, as well as metal, wicker, concrete & wood, vinyl, laminate and glass. https://www.homedepot.com/p/Rust-Oleum-Universal-11-oz-All-Surface-Hammered-Black-Spray-Paint-and-Primer-in-One-342489/307244803

A:  Thank you for reaching out! Our Hammered Dark Bronze is slightly darker than our Hammered Brown color. - Rust-Oleum Product Support 2

A:  Hi Cathy, if the wood surface has a previous finish such as a polyurethane on the surface, our Rust-Oleum Stops Rust Hammered Sprays may be applied over this finish. We would recommend scuff sanding with 220-320 grit sandpaper to degloss the finish and ensure proper adhesion. Hammered finishes work best when a coat is applied to the surface slightly heavier than you would with a traditional spray paint, taking care to not apply so heavily that it will run or drip. If this doesn't work to create a hammered finish, please give us a call at 800-481-4785, and we will be happy to help! - Rust-Oleum Product Support 2