Questions and Answers for Rust-Oleum Stops Rust 1 qt. Protective Enamel Satin White Interior/Exterior Paint (2-Pack)

A:  Thank you for reaching out, Jess. Yes, Rust-Oleum Stops Rust Satin Protective Enamel Paint can be applied to treated wooden surfaces like your fence. -Rust-Oleum Product Support 14

A:  We're happy to help, Bryan. While any additional tint or colorant can not be added to Rust-Oleum Stops Rust Protective Enamel, you can mix multiple colors of Stops Rust to create a custom color. We recommend mixing all your paint at the same time to ensure for a consistent finish across your project. -Rust-Oleum Product Support 14

A:  We're happy to help, Sheri. Rust-Oleum Stops Rust Protective Enamel can be applied directly to outdoor non-galvanized metal surfaces without the need of a primer. Be sure to thoroughly clean the surface using a degreasing detergent to ensure for the best adhesion. -Rust-Oleum Product Support 14

A:  We're happy to help! Yes, Rust-Oleum Stops Rust Protective Enamel can be applied to the interior and exterior sides of your door. When painting previously coated surfaces remove any loose paint using a wire brush and then clean the surface using a degreasing detergent. Glossy surfaces should also be sanded before cleaning to help build a surface profile. -Rust-Oleum Product Support 14

A:  We're happy to help, Greg. When applying Rust-Oleum Stops Rust Protective Enamel Paint with an air paint sprayer, you can thin up to 15% with acetone. If using an airless, thinning is not typically required. Make sure to follow the recommendations for your paint sprayer as well for the best results. -Rust-Oleum Product Support 14

A:  Happy to help! When applying Rust-Oleum Stops Rust Protective Enamel Paint to bare metal, we do recommend a primer for the best coverage and adhesion. Keep in mind, while matte finishes will hide scuff marks and surface imperfections better, these finishes tend to stain or hold on to dust/dirt easier than a glossy finish. We would recommend waiting at least 7 days after application before cleaning the surface to allow the paint to fully cure. - Rust-Oleum Product Support 3

A:  We're happy to help, Allie! To ensure full adhesion of Rust-Oleum Stops Rust Protective Enamel Paint on vinyl, the surface must first be primed with a suitable primer. We recommend Rust-Oleum Zinsser Bulls Eye 1-2-3 Water-Based Primer. This primer does not require sanding, and it can be topcoated after 1 hour in ideal conditions, even with an oil-based paint.0 https://www.homedepot.com/p/Zinsser-Bulls-Eye-1-2-3-1-Gal-White-Water-Based-Interior-Exterior-Primer-and-Sealer-2001/100398391 -Rust-Oleum Product Support 14

A:  Happy to help, Rick! When applying Rust-Oleum Stops Rust Protective Enamel Paint with an air paint sprayer, you can thin up to 15% with acetone. If using an airless, thinning is not typically required. Make sure to follow the recommendations for your paint sprayer as well for the best results. - Rust-Oleum Product Support 3

A:  We like the way you think, Greg! Yes, Rust-Oleum Stops Rust Protective Enamel Paint can be applied to exterior fiberglass surfaces. Make sure to clean and scuff sand the surface to ensure full adhesion. - Rust-Oleum Product Support 3

A:  Thank you for reaching out, Bill. While Rust-Oleum Stops Rust Protective Enamel dries to the touch in 2–4 hours, we recommend allowing the surface to fully cure for at least 3 days before exposing the surface to regular use. -Rust-Oleum Product Support 14